Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small green circuit board with a silver camera lens and a long flat ribbon cable attached

LORDWORLD

LORDWORLD IMX219 8MP Camera Module Raspberry Pi 5 79.3° FOV 200mm Cable

SKU CH-3Q8G-N3QGP

8 MP IMX219 sensor delivers 3280 × 2464 resolution with a 79.3° field of view and includes a 200 mm CSI cable for Raspberry Pi 5

  • IMX219 sensor captures 8 megapixel images at 3280 × 2464 resolution
  • 3° field of view fits wide scenes into a single frame
  • MIPI-CSI interface connects directly to Raspberry Pi 5 without adapters
  • Included 200 mm flexible cable eases routing inside tight enclosures
  • New condition ensures full sensor performance from first power-up

IMX219 8MP Camera for Raspberry Pi 5

This camera module uses the IMX219 sensor and connects to the Raspberry Pi 5 via the MIPI-CSI interface. It ships with a 200mm flexible CSI cable for straightforward installation. The unit captures still images at 3280×2464 resolution.

79.3° FOV suits standard viewing angles

The 79.3° field of view works well for general monitoring, robotics vision and typical maker projects where a natural perspective is needed. Makers who require a wider scene should consider the alternative 120° FOV option instead.

8MP resolution covers common imaging tasks

The 8MP sensor handles object detection, time-lapse capture and standard video recording comfortably. Applications demanding higher pixel counts or specialised low-light performance will exceed the capabilities of this module.

Priekšrocības

  • IMX219 sensor captures 8 megapixel images at 3280 × 2464 resolution
  • 3° field of view fits wide scenes into a single frame
  • MIPI-CSI interface connects directly to Raspberry Pi 5 without adapters
  • Included 200 mm flexible cable eases routing inside tight enclosures
  • New condition ensures full sensor performance from first power-up

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Which Raspberry Pi board is required for the IMX219 8MP module with the 200mm CSI cable?

The module is designed for the Raspberry Pi 5 and connects through its MIPI-CSI interface using the included 200mm flexible cable.

Can the 79.3° field-of-view module be used with a Raspberry Pi 4 or earlier board?

The supplier highlights compatibility with the Raspberry Pi 5; the 200mm CSI flex cable and pinout are matched to the Pi 5 camera connector, so earlier boards would need a different cable and are not referenced.

What resolution should appear in the preview to confirm the IMX219 sensor is running at its full 8MP capability?

A live preview or still capture showing 3280×2464 pixels confirms the sensor is operating at its maximum 8MP resolution.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.