Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular circuit board with three USB ports, one Ethernet jack, USB-C power input and indicator LEDs

LORDWORLD

LORDWORLD USB 3.2 Gen1 Gigabit Ethernet HUB HAT 3 Ports development board

SKU CH-G9S3-HFMKS

Adds three USB 3.2 Gen1 ports and a Gigabit Ethernet port to Raspberry Pi boards with a USB-C power input for stable operation

  • Expands connectivity with 3x USB 3.2 Gen1 ports and 1x Gigabit Ethernet port
  • Adds wired network up to 1000M/100M/10M speeds for Raspberry Pi boards
  • Works driver-free on Windows, macOS, Linux and Android for instant setup
  • External USB-C 5V DC input provides stable power for attached devices
  • Status LEDs for power and each USB port simplify troubleshooting

Raspberry Pi USB 3.2 Hub HAT

This HAT adds three USB 3.2 Gen1 ports and one Gigabit Ethernet port to a Raspberry Pi single-board computer. It draws power from an onboard USB-C 5 V input for stable operation. LED indicators show power and per-port activity. The board works driver-free on Windows, macOS, Linux and Android and ships with development resources.

Makers expanding Pi connectivity

Developers who need extra high-speed USB ports and wired networking on a Pi 4 or earlier models will find this HAT useful. It is not suited for projects that require Power-over-Ethernet or more than three additional USB ports. Builds needing internal storage interfaces or wireless radios should look elsewhere.

Three USB 3.2 Gen1 ports

The decisive specification is the trio of USB 3.2 Gen1 downstream ports, each backward compatible with USB 3.0, 2.0 and 1.1 devices. This port count and speed determine whether the HAT satisfies the peripheral expansion requirement.

Priekšrocības

  • Expands connectivity with 3x USB 3.2 Gen1 ports and 1x Gigabit Ethernet port
  • Adds wired network up to 1000M/100M/10M speeds for Raspberry Pi boards
  • Works driver-free on Windows, macOS, Linux and Android for instant setup
  • External USB-C 5V DC input provides stable power for attached devices
  • Status LEDs for power and each USB port simplify troubleshooting

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

How do I confirm the HAT is working after attaching it to my Raspberry Pi?

The onboard power indicator shows the board is receiving power and each of the three USB port indicators lights when a device is connected and active, while the Gigabit Ethernet port negotiates at 1000M, 100M or 10M automatically.

What comes in the box and what must I provide separately?

The package includes the HAT board with three USB 3.2 Gen1 ports, one Gigabit Ethernet port and a USB-C 5 V DC power input, plus development resources and a manual; you must supply a Raspberry Pi, a 5 V USB-C power source and any USB or Ethernet cables you need.

Which version of the HAT should I choose for a Raspberry Pi 4 versus a Zero 2 W?

A single version covers all listed models — Raspberry Pi 4 B, 3 B+, 3 B, 2B, Zero, Zero 2 W and Zero WH — so you select the same board regardless of which compatible Pi you are using.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.