Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Silver 3.5 inch bare hard drive with circuit board visible

Maxtor

Maxtor DiamondMax 10 6B300R0 300GB 7200 RPM 16MB IDE 3.5" internal hard drive

SKU CH-1JQB-JF4DA MPN 6B300R0

300 GB 3.5" desktop drive with 7200 RPM, 16 MB cache and IDE Ultra ATA133 interface

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 300 GB capacity stores large file collections
  • 7200 RPM spindle speed delivers responsive data access
  • 16 MB cache buffers frequent read and write operations
  • IDE Ultra ATA133 interface connects to legacy desktop systems
  • Fluid dynamic bearing motor reduces acoustic noise

DiamondMax 10 300GB IDE Drive

The Maxtor DiamondMax 10 6B300R0 is a 300GB 3.5-inch internal hard drive spinning at 7200 RPM with 16MB cache. It uses the IDE Ultra ATA133 interface and includes native command queuing for improved multitasking performance. This new bare drive suits legacy desktop upgrades or industrial replacements requiring parallel ATA connectivity.

Compatibility Check Before Ordering

Verify your motherboard or controller provides a 40-pin IDE port and supports Ultra ATA133 transfer rates. Confirm the system BIOS recognises drives of this capacity without a software overlay. Ensure a free 4-pin Molex power connector and physical 3.5-inch bay space are available in the chassis.

Build Quality and Daily Use

A fluid dynamic bearing motor reduces acoustic output during seek operations rated at 9ms average seek time and 4.17ms latency. The Shock Protection System and Data Protection System enhance reliability against vibration and write errors. Bare-drive packaging means no mounting screws or cables are included; plan for standard IDE ribbon routing and secure mounting in the bay.

Priekšrocības

  • 300 GB capacity stores large file collections
  • 7200 RPM spindle speed delivers responsive data access
  • 16 MB cache buffers frequent read and write operations
  • IDE Ultra ATA133 interface connects to legacy desktop systems
  • Fluid dynamic bearing motor reduces acoustic noise

Specifikācijas

BrandMaxtor
SeriesDiamondMax 10
Model6B300R0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity300GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesNative command queuing
Fluid dynamic bearing motor for quiet operation
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Sūtījuma svars0.68 kg
Sūtījuma izmēri203 × 152 × 51 mm

Jautājumi par šo preci

Does the bare drive include cables or mounting brackets, or must they be purchased separately?

The drive is supplied as a bare unit only. IDE data cables, power adapters and 3.5-inch mounting screws are not included and must be sourced separately.

Is the 300 GB capacity the only option in the DiamondMax 10 line, or are other sizes available?

This model is the 300 GB variant. The supplier data lists only this capacity for the 6B300R0; other capacities would carry different model numbers.

What real-world performance can I expect from the 7200 RPM speed and 16 MB cache on an IDE Ultra ATA133 interface?

The 7200 RPM spindle and 16 MB cache deliver a 9 ms average seek time and 4.17 ms latency, suitable for desktop workloads on an ATA-133 channel.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.