Maxtor
Maxtor DiamondMax 10 6V080E0 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s 3.5" internal hard drive
80 GB SATA desktop drive spins at 7200 RPM with 8 MB cache for responsive storage
- PackagingBare Drive
- InterfaceSATA 3.0Gb/s
- Capacity80GB
- RPM7200 RPM
- Cache8MB
- Average Seek Time9ms
- 7200 RPM spindle speed enables faster data access
- 8 MB cache buffer improves burst transfer performance
- SATA 3.0 Gb/s interface provides broad desktop compatibility
- Fluid dynamic bearing motor reduces acoustic noise
- Shock Protection System safeguards data against physical impact
Desktop storage for legacy builds
The Maxtor DiamondMax 10 6V080E0 is a 3.5-inch internal hard drive with 80GB capacity. It connects through a SATA 3.0Gb/s interface and spins at 7200 RPM with an 8MB cache. This new bare drive suits older desktops or appliances that require a small SATA drive.
Sustained operation characteristics
The drive runs on a fluid dynamic bearing motor designed for quiet operation during continuous use. Native command queuing helps organise read and write requests when the system is under load. Shock Protection System and Data Protection System features work together to maintain data integrity over long periods.
Capacity decides suitability
At 80GB this drive only fits installations where a small boot or archive volume is sufficient. Builders who need more storage must choose a larger model. The SATA 3.0Gb/s interface limits maximum throughput to that standard.
Priekšrocības
- 7200 RPM spindle speed enables faster data access
- 8 MB cache buffer improves burst transfer performance
- SATA 3.0 Gb/s interface provides broad desktop compatibility
- Fluid dynamic bearing motor reduces acoustic noise
- Shock Protection System safeguards data against physical impact
Specifikācijas
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6V080E0 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 80GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.68 kg |
| Sūtījuma izmēri | 203 × 152 × 51 mm |
Jautājumi par šo preci
How quiet is the fluid dynamic bearing motor when the 7200 RPM drive runs continuously?
The fluid dynamic bearing motor is designed for quiet operation during sustained use, keeping acoustic output low even at 7200 RPM.
What cables and connectors are needed to install this bare 3.5" SATA 3.0Gb/s drive?
You need a standard SATA data cable and a SATA power connector from your power supply; no adapter or bracket is included with the bare drive.
Will the SATA 3.0Gb/s interface and native command queuing work on an older motherboard with only SATA 1.5Gb/s ports?
Yes, the drive is backward compatible with SATA 1.5Gb/s controllers and will operate at the lower link speed while still using native command queuing.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
