SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Maxtor
A 250 GB IDE desktop drive spinning at 7200 RPM with 8 MB cache and fluid-dynamic bearings
The Maxtor DiamondMax Plus 9 6Y250P0 is a 250GB 3.5-inch internal hard drive built for desktop systems that still rely on the IDE Ultra ATA133 interface. It suits enthusiasts maintaining period-correct retro builds or anyone replacing a failed drive in legacy industrial or embedded equipment.
The bare drive connects directly to a motherboard IDE channel using a standard 40-pin cable and requires a Molex power connector from the supply. Its 7200 RPM spindle and 8MB buffer deliver responsive performance for the platform while the Fluid Dynamic Bearing motor reduces acoustic output during operation.
With 250GB of formatted space the drive comfortably holds a vintage operating system, period applications and a modest media library. The 9ms average seek time keeps file access snappy within the constraints of the ATA-133 bus, though the fixed capacity leaves no room for expansion beyond a single volume.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax Plus 9 |
| Model | 6Y250P0 |
| Packaging | Bare Drive |
| Interface | IDE Ultra ATA133 / ATA-7 |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 8MB |
| Average Seek Time | 9ms |
| Features | Fluid Dynamic Bearing Motors |
| Form Factor | 3.5" |
| Sūtījuma svars | 0.45 kg |
| Sūtījuma izmēri | 152 × 102 × 51 mm |
The drive has an average seek time of 9ms, which is the primary latency factor under sustained random access workloads.
The Fluid Dynamic Bearing Motors are designed to reduce acoustic output and friction heat compared to traditional ball-bearing spindles.
The system requires a 40-pin IDE connector supporting the ATA-7 standard to communicate with this 3.5-inch bare drive.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?