Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with silver heatsink and black fan mounted on Raspberry Pi 5

MCDODO

MCDODO P33 M.2 NVME M-Key PoE+ Hat with Official Pi 5 Active Cooler

SKU CH-HZPX-DBXYJ

Adds M.2 NVME storage, PoE+ power up to 25.5 W and an active cooler to a Raspberry Pi 5

  • TypeSingle Board Computers
  • Add fast NVMe storage via M.2 2230/2242/2260/2280 support
  • Power the Pi 5 through Ethernet using PoE+ 802.3 at up to 25.5 W
  • Delivers stable 5.1 V 4.5 A output for Pi 5 and peripherals
  • Official active cooler with aluminium heatsink and PWM fan keeps temperatures low
  • Single HAT combines storage, PoE+ power and cooling in one board

M.2 NVMe HAT for Raspberry Pi 5

This HAT adds an M-Key M.2 slot that accepts NVMe SSDs in 2230, 2242, 2260 and 2280 lengths. It connects through the PCIe interface for high-speed storage on the Raspberry Pi 5. PoE+ support lets the board draw up to 25.5 W over Ethernet using the 802.3 at protocol. An official active cooler with aluminium heatsink and PWM fan is included for thermal management.

Makers adding fast local storage to a Pi 5

The board suits builders who want NVMe speeds and a single-cable power solution via PoE+. It delivers a regulated 5.1 V at 4.5 A to the Pi 5 and attached peripherals. Buyers without PoE+ infrastructure or who prefer USB boot should look elsewhere. The note advises against connecting a USB-C power supply while the PoE+ HAT is in use.

Official active cooler and PoE+ simplify the build

The bundled cooler combines an aluminium heatsink with a PWM fan to maintain optimal temperatures under load. PoE+ eliminates the need for a separate USB-C power adapter and cable when compatible network equipment is present. The HAT accepts four common M.2 lengths so users can choose capacity without changing hardware.

Priekšrocības

  • Add fast NVMe storage via M.2 2230/2242/2260/2280 support
  • Power the Pi 5 through Ethernet using PoE+ 802.3 at up to 25.5 W
  • Delivers stable 5.1 V 4.5 A output for Pi 5 and peripherals
  • Official active cooler with aluminium heatsink and PWM fan keeps temperatures low
  • Single HAT combines storage, PoE+ power and cooling in one board

Specifikācijas

TypeSingle Board Computers

Jautājumi par šo preci

Do I need a Raspberry Pi 5 for this HAT to work?

Yes, the board is designed specifically for the Raspberry Pi 5 and includes the official active cooler that attaches directly to it.

Will a 2280 NVMe SSD fit on the M.2 slot?

The M-key slot accepts 2230, 2242, 2260 and 2280 length drives, so a 2280 SSD will fit and operate over the PCIe interface.

How can I verify the PoE+ power delivery is active after installation?

When the Ethernet cable supplies power under the 802.3 at protocol up to 25.5 W, the Pi 5 receives 5.1 V at 4.5 A and the PWM fan on the active cooler spins, confirming correct operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.