Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Clear plastic box holding brass hex standoffs, screws and nuts for Raspberry Pi

MCDODO

MCDODO Raspberry Pi Brass Standoff Kit 100 Pcs M2.5

SKU CH-039V-PRJB4

A 100-piece M2.5 brass standoff, screw and nut kit with storage case for mounting Raspberry Pi HATs on 11 mm GPIO headers

  • TypeSingle Board Computers
  • Perfect fit for Raspberry Pi HATs with 11 mm GPIO clearance and 2.75 mm holes
  • Durable brass standoffs and stainless-steel screws resist corrosion for long service life
  • Organised 100-piece kit includes spacers, screws and nuts in a protective storage case
  • Multiple spacer lengths from 5 mm to 20 mm cover every stacking scenario
  • Ready for Pi 5, 4B, 3B+, 3B, 3A+, Zero W and 2W installations

Raspberry Pi Brass Standoff Kit

This 100-piece kit supplies M2.5 brass spacers, stainless-steel screws and nuts plus a plastic storage case. It is designed for makers and developers who mount Raspberry Pi boards and HAT expansions securely.

Check board spacing before ordering

HAT GPIO headers sit roughly 11 mm above the board and mounting holes measure 2.75 mm diameter. Verify that your expansion stack matches these dimensions so the included spacers align correctly.

Brass spacers resist corrosion daily

Brass standoffs and stainless-steel fasteners withstand repeated assembly without rust. The compartmented case keeps the 16-piece groups of each length organised for quick access during prototyping.

Priekšrocības

  • Perfect fit for Raspberry Pi HATs with 11 mm GPIO clearance and 2.75 mm holes
  • Durable brass standoffs and stainless-steel screws resist corrosion for long service life
  • Organised 100-piece kit includes spacers, screws and nuts in a protective storage case
  • Multiple spacer lengths from 5 mm to 20 mm cover every stacking scenario
  • Ready for Pi 5, 4B, 3B+, 3B, 3A+, Zero W and 2W installations

Specifikācijas

TypeSingle Board Computers

Jautājumi par šo preci

What components come in the 100-piece kit and is a storage case included?

The kit contains 100 pieces: four M2.5 x 12+6 mm spacers, sixteen M2.5 x 5 mm screws, sixteen M2.5 nuts, sixteen M2.5 x 5+5 mm spacers, sixteen M2.5 x 11 mm female-female spacers, and sixteen M2.5 x 20+6 mm spacers, all supplied in a plastic storage box.

Which spacer lengths should I choose for a standard Raspberry Pi HAT stack?

Standard HATs sit roughly 11 mm above the board, so the sixteen M2.5 x 11 mm female-female spacers match that height; use the 5 mm screws and nuts to secure them.

Will the M2.5 hardware fit the mounting holes on a Raspberry Pi 5 or 4B?

Yes — Raspberry Pi boards use 2.75 mm mounting holes designed for M2.5 fasteners, so the supplied screws, nuts and spacers are the correct thread size.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.