Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black horizontal 1U power strip with two front and eight rear outlets, 15ft cord and NEMA 5-20P plug

MINUTEMAN

MINUTEMAN OES1020HV PDU 120V 16A 1U 10-Outlet NEMA 5-20P 15ft

SKU CH-D25Z-GC2W1 MPN OES1020HV

Distributes 120 V power to ten NEMA 5-15/20R outlets with a 15 ft cord and input circuit-breaker protection

  • TypePDUs & Line Conditioners
  • Rack Size1U
  • StyleHorizontal Installation, 0U Vertical Installation
  • Certifications62368-1 Certification
  • Maximum Input Current20A
  • Input Connector(s)NEMA 5-20P

Model OES1020HV

Skatīt vēl 8 konfigurācijas

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 10 outlets distribute power to multiple devices
  • 15 ft cord reaches distant rack connections
  • 1U or 0U mounting fits horizontal or vertical layouts
  • Input circuit breaker protects connected equipment from overloads
  • 62368-1 certification confirms safety compliance

10-Outlet PDU with 15 ft Cord

The Minuteman OES1020HV is a 1U horizontal or 0U vertical power distribution unit rated for 120 VAC input. It provides ten NEMA 5-15/20R receptacles, two on the front panel and eight on the rear. A 15 ft cord with a NEMA 5-20P plug connects the unit to the supply. The housing meets 62368-1 certification for safety.

Suits Racks Needing Mixed Access

This unit suits administrators who want front-panel access for temporary devices while keeping permanent connections at the rear. It also fits vertical 0U mounting when horizontal rack space is scarce. Buyers who need outlet counts beyond ten, such as 14, 18 or 24, should look at larger models. Installations requiring input currents above 20 A or output beyond 16 A cannot use this PDU.

16 A Maximum Output Current

The single specification that decides fit is the 16 A maximum output current. All connected equipment must draw less than this limit in total, otherwise the input circuit breaker will trip. Verify the combined load of every device before installation.

Priekšrocības

  • 10 outlets distribute power to multiple devices
  • 15 ft cord reaches distant rack connections
  • 1U or 0U mounting fits horizontal or vertical layouts
  • Input circuit breaker protects connected equipment from overloads
  • 62368-1 certification confirms safety compliance

Specifikācijas

BrandMINUTEMAN
SeriesOE Series
ModelOES1020HV
TypePDUs & Line Conditioners
Rack Size1U
StyleHorizontal Installation, 0U Vertical Installation
Certifications62368-1 Certification
Maximum Input Current20A
Input Connector(s)NEMA 5-20P
Cord Length15 ft
Output Connector(s)Front Panel Receptacles: (2) 5-15/20R
Rear Panel Receptacles: (8) 5-15/20R
Maximum Output Current16A
Overload ProtectionInput Circuit Breaker Protection
FeaturesLonger power cords
Most Minuteman PDU units have up to 15-ft power cords, to allow for seamless installations
More standard outlets
Minuteman PDU units have 6, 8, 10, 14, 18, or 24 outlets. Most of the Minuteman PDUs have additional front outlets for improved access
Configuration versatility
Minuteman PDU units have a multi-form factor with 1U and 0U configurations allowing for either horizontal or vertical placement. 1U products ship with a stand-off mounting bracket, at no additional cost, that allows for vertical installation on most racks and enclosures
Locking (L) and Hardwire (
Sūtījuma svars2.86 kg
Sūtījuma izmēri523 × 201 × 64 mm

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How much heat or noise does the OES1020HV produce when it runs continuously?

The unit has no fans or moving parts, so it generates no audible noise and only minimal heat from normal current flow through its circuit breaker and 10 NEMA 5-15/20R outlets.

What must I already own to connect the OES1020HV to my rack?

You need a 120 VAC source with a NEMA 5-20R receptacle to accept the 15 ft NEMA 5-20P input plug, plus standard rack rails or the included stand-off bracket for 1U horizontal or 0U vertical mounting.

Will the OES1020HV work with older servers that only have NEMA 5-15P cords?

Yes. All 10 outlets accept both 5-15P and 5-20P plugs, so legacy equipment with standard 15 A cords plugs in directly without adapters.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.