Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black dual-tower CPU air cooler with six heatpipes and two 28 mm PWM fans, matte black finish, top cover installed

Montech

Montech NX600 Black CPU cooler 6 heatpipes 28 mm fan 2000 RPM 85 CFM

SKU CH-PS8R-ZEGBF MPN NX600 Black

Dual-tower air cooler with six heatpipes, 85 CFM airflow and 34.17 dBA noise at 2000 RPM

  • ColorBlack
  • TypeFan & Heatsinks
  • Fan Size28mm
  • CPU Socket CompatibilityIntel LGA115X / 1200 / 1700 / 1851 and AMD AM4 / AM5
  • RPM2000 RPM
  • Air Flow85 CFM
  • Dual-tower design with 52 fins per tower maximises heat dissipation
  • Six soldered copper heatpipes transfer heat rapidly from the CPU
  • Dual 28 mm PWM fans deliver 85 CFM airflow at 2000 RPM
  • Quiet 34.17 dBA operation suits noise-sensitive builds
  • Supports Intel LGA 115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets

Dual-Tower Air Cooler for High-End CPUs

The Montech NX600 Black is a dual-tower CPU air cooler built for Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets. It uses six heat pipes and two 28 mm PWM fans to move 85 CFM of air at 34.17 dBA. The black finish and top cover suit stealth builds without LED lighting.

Six Heat Pipes with Soldered Copper Base

The single specification that decides fit is the six heat pipes soldered directly to a flat copper base. This layout spreads heat across 52 fins per tower, giving the surface area needed for sustained loads on modern high-wattage processors. Without this pipe count and direct-contact design, the cooler cannot match the stated airflow target.

Standard Four-Pin Mount with Clearance Checks

Installation follows the usual four-pin PWM connector and supplied socket brackets for the listed platforms. The dual-tower height and 3.17 lb weight mean you must verify case side-panel clearance and motherboard VRM heatsink space before fitting. The top cover adds height, so low-profile cases often cannot accommodate it. Buyers needing a slimmer single-tower design or RGB illumination should look elsewhere.

Priekšrocības

  • Dual-tower design with 52 fins per tower maximises heat dissipation
  • Six soldered copper heatpipes transfer heat rapidly from the CPU
  • Dual 28 mm PWM fans deliver 85 CFM airflow at 2000 RPM
  • Quiet 34.17 dBA operation suits noise-sensitive builds
  • Supports Intel LGA 115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets

Specifikācijas

BrandMontech
ModelNX600
Part NumberNX600 ARGB Black
ColorBlack
TypeFan & Heatsinks
Fan Size28mm
CPU Socket CompatibilityIntel LGA115X / 1200 / 1700 / 1851 and AMD AM4 / AM5
RPM2000 RPM
Air Flow85 CFM
Noise Level34.17dBA
Power Connector4 Pin
LEDNo
Heatsink MaterialCopper
Weight3.17 lb
Sūtījuma svars1.36 kg
Sūtījuma izmēri203 × 203 × 149 mm

Jautājumi par šo preci

What does 85 CFM airflow mean for my CPU temperatures?

The 85 CFM rating shows the maximum air volume the dual 28 mm fans can push through the twin fin stacks, giving strong heat removal during sustained loads.

How does the 4-pin PWM connector control the 2000 RPM fans?

The 4-pin PWM header lets the motherboard vary fan speed up to 2000 RPM automatically, balancing cooling performance against the 34.17 dBA noise ceiling.

Will the 3.17 lb dual-tower cooler fit my motherboard and case?

The cooler mounts on Intel LGA115X, 1200, 1700, 1851 and AMD AM4, AM5 sockets; verify your case clearance for a dual-tower design weighing 3.17 lb.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.