NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
MSI
A refurbished graphics card with 8GB GDDR6 memory, 4864 CUDA cores and a 1665 MHz boost clock for 1440p gaming
This graphics card uses the NVIDIA GeForce RTX 3060 Ti GPU with 4864 CUDA cores and 8GB of GDDR6 memory on a 256-bit bus. The boost clock reaches 1665 MHz while the memory runs at 14000 MHz. It targets 1440p gaming and VR workloads with a 200W thermal design.
Your motherboard must provide a full-length PCI Express 4.0 x16 slot and the chassis must clear a 305 mm card. The board draws power through a single 8-pin connector, so the PSU needs that cable and at least 600W capacity. Verify case clearance and cable routing before ordering.
The Ventus cooler uses three axial fans to move heat away from the dense PCB. One HDMI 2.1 port and three DisplayPort 1.4a connectors drive up to four monitors at 7680 x 4320 resolution. The ATX form factor fits standard tower builds while the rear bracket vents exhaust air directly out of the case.
| Brand | MSI |
|---|---|
| Series | Ventus |
| Model | RTX 3060TI VENTUS 3X 8G LHR |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 Ti |
| Boost Clock | 1665 MHz |
| CUDA Cores | 4864 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 200W |
| Recommended PSU Wattage | 600W |
| Power Connector | 8-Pin |
| Form Factor | ATX |
| Max GPU Length | 305 mm |
| Sūtījuma svars | 1.25 kg |
| Sūtījuma izmēri | 378 × 265 × 83 mm |
The card ships with the triple-fan cooler installed and a standard PCIe bracket; you must provide an 8-pin PCIe power cable from a 600W or larger PSU and your own HDMI 2.1 or DisplayPort 1.4a display cables.
This model only exists as an 8GB 256-bit GDDR6 variant with 4864 CUDA cores and a 1665 MHz boost clock; choose it if those specs match your workload, otherwise look at a different SKU.
In a PCIe 4.0 slot with a 600W PSU the GPU can hit 1665 MHz, driving up to four monitors at 7680x4320 through one HDMI 2.1 and three DisplayPort 1.4a outputs while staying within a 200W TDP.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?