Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Blue rectangular ATX breakout board with 24-pin connector, USB port, switch and LED, 128x48x30mm

myVolts

myVolts 20/24 Pin ATX Breakout Board with USB 5V Port

SKU CH-SW5T-6C1F8

ATX breakout board converts a 20 or 24 pin supply into bench power with 3.3V, 5V, 12V and -12V rails plus a USB 5V port

  • TypeAT
  • Converts ATX PSU into benchtop supply with four voltage rails
  • 24-pin T socket accepts both 20-pin and 24-pin plugs
  • Onboard power switch and indicator simplify bench testing
  • Gasket design helps prevent accidental short circuits
  • USB 5V port adds convenient low-voltage output for projects

Benchtop ATX Breakout Board

The myVolts breakout board converts a standard ATX power supply into a benchtop unit with four voltage channels. A 24-pin connector accepts both 20-pin and 24-pin plugs, while a built-in switch and power indicator give direct control. The module measures 128 by 48 by 30 millimetres and includes a gasket to prevent short circuits.

Makers needing adjustable rails, not PC builders

Hobbyists developing embedded projects gain quick access to 3.3 V, 5 V, 12 V and -12 V rails without splicing wires. The onboard USB port supplies 5 V for convenient device charging or powering small modules. Builders assembling a complete computer gain no extra motherboard connectors or cable management features from this board.

24-pin ATX input with USB 5 V output

The single specification that decides fit is the 24-pin ATX socket compatible with 20-pin plugs. If your power supply uses this standard connector, the board delivers four regulated voltages plus a USB 5 V port for bench use. Any supply lacking the 20- or 24-pin ATX interface cannot connect.

Priekšrocības

  • Converts ATX PSU into benchtop supply with four voltage rails
  • 24-pin T socket accepts both 20-pin and 24-pin plugs
  • Onboard power switch and indicator simplify bench testing
  • Gasket design helps prevent accidental short circuits
  • USB 5V port adds convenient low-voltage output for projects

Specifikācijas

TypeAT

Jautājumi par šo preci

How much heat or noise does the 24-pin ATX breakout board add when running all day?

The board is a passive connector with no fan or active components, so it adds no audible noise and negligible heat beyond the power supply itself.

What must I already own for the 20/24-pin breakout board to function?

You need a standard ATX power supply with a 20-pin or 24-pin main connector to plug into the board.

Will the 24-pin breakout board work with an older 20-pin ATX power supply?

Yes, the 24-pin socket is compatible with 20-pin plugs, so it fits older ATX units without an adapter.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.