Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black nylon-sleeved 24-pin ATX extension cable, 30 cm long, 18AWG

myVolts

myVolts 24-pin ATX Extension Cable 30 cm 18AWG

SKU CH-YP2H-R18D7

A 30 cm 24-pin ATX extension cable built with 18AWG wire and nylon sleeving for tidy PSU routing

  • TypeAT
  • 24-pin ATX extension adds 30 cm reach for flexible PSU placement
  • 18 AWG conductors with 150 strands of 0.08 mm copper deliver reliable power
  • Nylon sleeved jacket protects wires and keeps builds tidy
  • Male-to-female connectors plug straight into existing cables with no tools
  • 3 m length suits compact cases and custom routing

Extension Cable for ATX 24-pin Power

This myVolts cable extends a standard ATX 24-pin motherboard connector by 30 cm. It uses 18AWG conductors with a 150-core 0.08TS construction and a nylon-sleeved jacket. The male-to-female design connects directly between the power supply and the motherboard. It is intended for PC builders who need extra reach inside a case.

Replaces Short or Stiff Stock Cables

The extension replaces a factory cable that is too short or too rigid to route cleanly behind a motherboard tray. The 30 cm length adds enough slack for larger chassis or non-standard PSU placement. The jump is worth it when the original cable cannot reach the 24-pin socket without tension or sharp bends. No electrical change occurs; only the physical reach is improved.

Suits Custom Builds Needing Modest Extra Length

This cable suits builders who need a short, flexible extension for cable management in mid-tower or full-tower cases. It is not for users who require a longer run beyond 30 cm or who need a different pin configuration such as EPS 8-pin. Buyers wanting a full replacement cable kit or a different colour should look elsewhere.

Priekšrocības

  • 24-pin ATX extension adds 30 cm reach for flexible PSU placement
  • 18 AWG conductors with 150 strands of 0.08 mm copper deliver reliable power
  • Nylon sleeved jacket protects wires and keeps builds tidy
  • Male-to-female connectors plug straight into existing cables with no tools
  • 3 m length suits compact cases and custom routing

Specifikācijas

TypeAT

Jautājumi par šo preci

How much space does the 30 cm 24-pin ATX extension need behind the motherboard tray?

The cable is 30 cm long and uses 18 AWG conductors with a nylon sleeve, so allow roughly 30 cm of clearance plus room for the 24-pin connector depth.

Which way round do the male and female 24-pin connectors go when installing the extension?

Plug the male end into the PSU’s 24-pin output and the female end onto the motherboard’s 24-pin socket; reversing them will prevent the system from powering on.

When should the 18 AWG 24-pin extension be replaced?

Replace the cable if the nylon sleeve frays, any of the 150 individual 0.08 TS strands break, or the 24-pin connectors show melted pins or loose retention clips.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.