Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 24-pin dual PSU adapter cable with 20+4 main connector and two secondary connectors 85cm length

myVolts

myVolts 24Pin Dual PSU Adapter 20+4 85cm 2000W power supply

SKU CH-SV9K-BJP9E

Connects up to three PSUs to one motherboard via 24-pin 20+4 interfaces with 85 cm cables for up to 2000 W systems

  • TypeAT
  • Connect up to three PSUs to one motherboard via 24-pin 20+4 main and two secondary connectors
  • Combine two power units for higher output without replacing existing hardware up to 2000 W
  • 20+4 pin design works with both 24-pin and 20-pin motherboard sockets
  • 85 cm thin cable keeps routing tidy while maintaining stable power delivery
  • Solves GPU power shortages that cause clock throttling under load

Dual PSU adapter for multi-unit builds

This adapter lets three ATX power supplies feed one motherboard through a single 24-pin connector. It targets builders who need extra wattage for high-end graphics cards without replacing an existing unit. The 20+4-pin main plug works with both 24-pin and 20-pin motherboard headers.

Compact 85 cm cable with ABS and metal ends

The 85 cm length keeps routing tidy inside full-tower cases while reaching dual PSU mounts. Female 24-pin sockets on all three branches accept standard ATX cables directly, so no soldering or crimping is required. The mixed ABS and metal construction resists bending stress during installation.

Ships as a single ready-to-use cable

Only the adapter cable itself is included — no extra screws, software or documentation. It supports combined loads up to 2000 W across the connected units and is compatible with Windows and Linux systems. Buyers who need modular sleeving kits or additional PCIe power splitters must source them separately.

Priekšrocības

  • Connect up to three PSUs to one motherboard via 24-pin 20+4 main and two secondary connectors
  • Combine two power units for higher output without replacing existing hardware up to 2000 W
  • 20+4 pin design works with both 24-pin and 20-pin motherboard sockets
  • 85 cm thin cable keeps routing tidy while maintaining stable power delivery
  • Solves GPU power shortages that cause clock throttling under load

Specifikācijas

TypeAT

Jautājumi par šo preci

What motherboard power connector does the 20+4 pin main cable support?

The main cable uses a 24-pin female connector split as 20+4 pins, so it fits both 24-pin and 20-pin motherboard sockets.

How much clearance does the 85 cm cable need inside a case?

The cable is approximately 85 cm (33.5 in) long, so allow at least that much routing space between the PSU mounting points and the motherboard connector.

Which power supply plugs into the 20+4 pin connector during installation?

The primary PSU connects to the single 20+4 pin female plug; the two additional PSUs attach to the other 24-pin female plugs, and all three must be switched on together.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.