Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Orange braided PSU cable extension kit with 24-pin, two CPU and three GPU connectors, plus combs

myVolts

myVolts 50cm PSU Cable Extension Kit Orange 24Pin 2xCPU 3xGPU 18AWG

SKU CH-7Z1T-SFEZD

Sleeved 18AWG extension kit adds 50cm to motherboard, dual CPU and triple GPU power cables with included combs for tidy routing

  • TypeAT
  • 18AWG UL 1015 tinned copper wires for durable power delivery
  • 50cm length fits standard ATX case routing needs
  • 1 x 24-pin 2 x CPU 3 x GPU extensions cover full system
  • 17 vivid colour options let you match any build theme
  • 18 included cable combs enable clean professional cable management

Cable Kit Contents

The myVolts extension kit adds 50cm of length to ATX motherboard, CPU and GPU power cables. It includes one 24-pin ATX extension, two 4+4-pin EPS CPU extensions and three 6+2-pin PCIe GPU extensions. Fifteen 8-pin and three 24-pin cable combs are supplied for clean routing. The kit suits builders who want a unified colour theme without replacing the PSU.

Wire Gauge And Sleeve

Each conductor uses 18AWG UL 1015 tinned copper wire rated for heat and humidity resistance. The high-density braided sleeve gives a stiff yet adaptable feel that holds shaped routes once trained. Cables do not arrive pre-curved; they can be bent by hand to match the build layout. The design is not intended for builders who need pre-formed cables or thinner wire for tight clearances.

Sustained Load Behaviour

The 18AWG copper and UL 1015 insulation maintain stable delivery during extended GPU or CPU workloads. Tinned conductors resist oxidation that can increase resistance over time. The kit has been tested with an RTX3090 GPU under load. It does not address builders who require thicker gauge wire for extreme overclocking or who need longer extensions than 50cm.

Priekšrocības

  • 18AWG UL 1015 tinned copper wires for durable power delivery
  • 50cm length fits standard ATX case routing needs
  • 1 x 24-pin 2 x CPU 3 x GPU extensions cover full system
  • 17 vivid colour options let you match any build theme
  • 18 included cable combs enable clean professional cable management

Specifikācijas

TypeAT

Jautājumi par šo preci

How do I install the 24-pin motherboard and 8-pin GPU extensions without kinking the braided sleeve?

Route each 50 cm extension from the PSU to the component, then snap the supplied 24-pin and 8-pin combs onto the cables at even intervals to lock the bends in place; the high-density braid holds the shape once trained.

What upkeep will the 18AWG UL 1015 tinned copper wires and braided sleeves need over time?

The tinned copper resists oxidation and the sleeve resists abrasion, so only occasional dust removal with compressed air is required; no re-termination or sleeve replacement is expected.

What is the first limit reached when the 3 GPU and 2 CPU extensions run at full load for hours?

The 18AWG UL 1015 conductors set the thermal ceiling; they are rated for continuous current at the wire’s temperature limit without exceeding it.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.