Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact rectangular power module with matte black finish and multiple ATX connectors visible

myVolts

myVolts LD-200W Power Module 16-24VDC in 200W silent ATX power supply

SKU CH-R94M-8A4TC

Fanless 200 W ATX module converts 16–24 V DC to standard PC rails with over-voltage and short-circuit protection

  • TypeAT
  • Fanless design runs 100% silent
  • Accepts 16-24 V DC input range
  • Delivers 200 W with 85% efficiency
  • Over-voltage and short-circuit protection built in
  • Compact 155 x 35 x 20 mm module fits mini-ITX builds

Silent DC-to-ATX power for mini-ITX builds

The myVolts LD-200W is a fanless DC-to-DC module that converts a 16–24VDC source into standard ATX rails for compact motherboards. It suits builders who need a completely silent power solution inside space-constrained chassis.

Zero noise, 85% efficiency at 19V input

With no moving parts the unit runs 100% silent while delivering up to 200W continuous power. Typical draw is 12A at 19VDC and efficiency reaches 85% or more. Over-voltage protection trips at 1.5× rated output and short-circuit protection shuts the rails down instantly.

Ready-to-wire loom for immediate assembly

The package includes a 24-pin ATX to 12V AUX adapter, a 4-pin CPU power lead and a 4-pin floppy drive connector so the module plugs straight into a mini-ITX board. No extra cables or configuration are required.

Priekšrocības

  • Fanless design runs 100% silent
  • Accepts 16-24 V DC input range
  • Delivers 200 W with 85% efficiency
  • Over-voltage and short-circuit protection built in
  • Compact 155 x 35 x 20 mm module fits mini-ITX builds

Specifikācijas

TypeAT

Jautājumi par šo preci

How do I connect the 24-pin ATX cable and the 12 V AUX lead to my mini-ITX motherboard?

Plug the 24-pin ATX connector into the motherboard main power socket, then attach the separate 12 V AUX lead to the CPU 4-pin header; both cables are included in the box.

What maintenance will the fanless 200 W module need over time?

With no moving parts, only occasional dust removal from the 155 × 35 × 20 mm PCB is required; the high-quality capacitors are rated for long life.

At what input voltage does the 85 % efficiency rating apply?

The 85 % or higher efficiency figure is specified at 19 VDC input.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.