Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact bench power supply, dark metal case, digital display, front knobs and binding posts

myVolts

myVolts MCH-K302D 110V 30V 2A 60W adjustable power supply

SKU CH-8EXX-7SW6V MPN MCH-K302D

Adjustable DC power supply delivers 0-30V at 2A with 60W output, CE and ISO certified, and includes full output protection

  • TypeAT
  • Precise control with 10 mV voltage and 1 mA current steps
  • 60 W output from 0-30 V and 0-2 A
  • Switchable 110 V or 220 V input for global use
  • 85 % efficiency with temperature-controlled fan cooling
  • CE and ISO certified for safety and reliability

Adjustable 30V 2A bench supply

The myVolts MCH-K302D is a regulated DC power supply with continuously adjustable output from 0-30V and 0-2A. It accepts selectable 110V or 220V AC input at 50Hz or 60Hz. The unit provides 60W output power with 85% efficiency and carries CE and ISO certifications for laboratory and repair use.

Sustained full-load operation

A temperature-controlled fan enables continuous output at full load without thermal throttling. The supply maintains stable voltage and current regulation across the working range of -10°C to 60°C and humidity below 90%. Voltage and current steps of 10mV and 1mA allow precise setting during extended test sessions.

Replaces fixed-voltage adapters

This unit replaces multiple single-voltage wall adapters when prototyping or servicing DC motors, fans or automotive electronics. The jump is worthwhile when a project demands variable voltage, current limiting or the 150W peak capacity for short transients. It is not suited for applications needing more than 2A continuous current or voltages above 30V.

Priekšrocības

  • Precise control with 10 mV voltage and 1 mA current steps
  • 60 W output from 0-30 V and 0-2 A
  • Switchable 110 V or 220 V input for global use
  • 85 % efficiency with temperature-controlled fan cooling
  • CE and ISO certified for safety and reliability

Specifikācijas

TypeAT

Jautājumi par šo preci

How loud or hot does the MCH-K302D get when running continuously at full load?

A temperature-controlled fan spins only when needed, keeping the unit stable during continuous 60 W operation from -10 °C up to 60 °C ambient.

What cables or accessories must I already have to start using the MCH-K302D?

The box includes a power cord, test leads, manual and certificate — just plug into 110 V or 220 V mains and connect the red and black leads to your circuit.

Will the MCH-K302D work safely with older 5 V logic boards I still repair?

Yes — output adjusts from 0 V to 30 V in 10 mV steps and 0 A to 2 A in 1 mA steps, so you can dial precise low-voltage, low-current limits for legacy hardware.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.