Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Braided PSU cable extension kit in blueblack with 24-pin ATX, two 8-pin CPU and three 8-pin GPU cables plus combs

myVolts

myVolts PSU Cable Extension Kit 50cm 1x24P 2x8P CPU 3x8P GPU Blueblack

SKU CH-4EM3-0HM12

Sleeved 18AWG extension kit adds 50cm to one 24-pin motherboard, two 8-pin CPU and three 8-pin GPU cables with combs for clean routing

  • TypeAT
  • 18AWG tinned copper wires handle high current reliably
  • 500mm length gives ample reach for tidy routing in large cases
  • 17 colour options let you match or contrast any build theme
  • 20 cable combs included keep every cable aligned and neat
  • Tested with 3090-class GPU ensures compatibility with power-hungry graphics cards

Extension kit contents

The myVolts PSU cable extension kit adds a 24-pin ATX motherboard cable, two 4+4-pin EPS CPU cables and three 6+2-pin PCIe GPU cables to an existing power supply. All wires are 18AWG UL 1015 tinned copper wrapped in a high-density braided sleeve that balances stiffness and pliability for clean routing. Three 24-pin combs and fifteen 8-pin combs are included to keep every run straight. The blueblack colourway is one of seventeen available options.

Who this suits

Builders who want to extend and colour-coordinate their main power cables without replacing the power supply itself will find the kit a direct fit. The 500mm length works well in standard mid-tower and full-tower layouts where extra reach is needed for tidy cable management. Systems that already use non-modular or short factory cables benefit most from the added length and combs. Buyers who need proprietary connectors or a different pin count should look elsewhere.

Deciding specification

The single detail that determines compatibility is the 18AWG UL 1015 tinned copper conductor size used across every cable in the kit. This gauge sets the current-carrying capacity and heat resistance for the 24-pin, 4+4-pin and 6+2-pin extensions alike. If your build requires a thicker or thinner wire gauge, this kit will not match that requirement.

Priekšrocības

  • 18AWG tinned copper wires handle high current reliably
  • 500mm length gives ample reach for tidy routing in large cases
  • 17 colour options let you match or contrast any build theme
  • 20 cable combs included keep every cable aligned and neat
  • Tested with 3090-class GPU ensures compatibility with power-hungry graphics cards

Specifikācijas

TypeAT

Jautājumi par šo preci

How far can the 500mm extensions reach in a full-tower case?

Each extension is 500mm long, giving enough reach for large full-tower layouts while keeping cables manageable.

Do the 18AWG UL 1015 tinned copper wires run cooler during all-day loads?

The 18AWG UL 1015 tinned copper construction resists heat and humidity better than standard wire, helping cables stay cooler under sustained use.

Which power supply connectors must my PSU already have for this kit to work?

Your PSU needs a 24-pin ATX, two 4+4-pin EPS CPU, and three 6+2-pin PCIe connectors to plug these extensions in.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.