Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Compact rectangular unit in dark ABS plastic, 1.8 inch colour LCD front panel with four digit readout, knob and buttons below

myVolts

myVolts WZ5005 DC 6-55V to 0-50V 250W 5A adjustable power supply

SKU CH-MF02-GBFMB MPN WZ5005

Adjustable DC power supply converting 6-55V input to 0-50V output at up to 250W with 1.8-inch LCD display and protection features

  • TypeAT
  • Adjustable output 0-50V 5A for versatile testing
  • 250W maximum power handles demanding loads
  • 8 inch color LCD shows voltage current and protection status
  • Built-in OVP OCP OTP LVP safeguards connected equipment
  • Compact 120 x 74 x 35mm ABS enclosure fits tight benches

Compact bench supply for lab and repair

The myVolts WZ5005 is a DC regulated power supply built for engineers, technicians and hobbyists who need precise voltage and current on the bench. It accepts an input range of DC6-55V and delivers an adjustable output of DC0-50V at up to 5A, with a maximum power of 250W.

Flame retardant ABS with 1.8 inch LCD

The enclosure uses flame retardant ABS and measures 120 x 74 x 35mm, making it small enough for a crowded workbench. A 1.8 inch colour LCD shows four digit readings while front panel buttons set OVP and OCP thresholds; OTP and LVP are built in. USB to TTL or RS485 to TTL modules can be added for PC upper computer or Android APP control, and a key lock prevents accidental changes.

Replaces fixed voltage bricks and basic modules

This unit replaces single output wall adapters and simple buck boards when a project needs variable voltage, constant current limiting or automated protection. The jump is worth it when you need to characterise a load, charge batteries safely or drive a prototype through its full operating range without swapping supplies.

Priekšrocības

  • Adjustable output 0-50V 5A for versatile testing
  • 250W maximum power handles demanding loads
  • 8 inch color LCD shows voltage current and protection status
  • Built-in OVP OCP OTP LVP safeguards connected equipment
  • Compact 120 x 74 x 35mm ABS enclosure fits tight benches

Specifikācijas

TypeAT

Jautājumi par šo preci

What is the maximum input voltage the WZ5005 accepts, and what output ceiling does it enforce?

The unit takes a DC input between 6 V and 55 V and regulates the output to a maximum of 50 V, with a 250 W power limit.

What are the exact enclosure dimensions of the WZ5005 so I can verify it fits my bench space?

The case measures 120 mm high, 74 mm wide and 35 mm deep (4.7 × 2.9 × 1.4 in).

How do I connect the WZ5005 to a PC for remote control, and which setting is often overlooked?

Plug a USB-to-TTL or RS485-to-TTL module into the rear port, then enable the communication mode in the menu; the key-lock must be disabled first or commands are ignored.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.