Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular silver aluminium unit with screw terminals and voltage selector switch

myVolts

myVolts XC-120-12 power supply 12V 10A 120W

SKU CH-JR05-2JZDR MPN XC-120-12

Converts AC 110V or 220V to DC 12V at 10A 120W with short-circuit, overload, over-voltage and over-temperature protection

  • TypeAT
  • Delivers stable 12 V DC at 10 A for 120 W output
  • Accepts both 110 V and 220 V AC with manual selector switch
  • Protected against short-circuit, overload, over-voltage and over-temperature
  • Aluminium enclosure measures 200 mm × 98 mm × 42 mm weighing 476 g
  • Certified to FCC, CE and RoHS standards for safety compliance

Industrial AC-to-DC converter

The myVolts XC-120-12 converts mains voltage of 110V or 220V AC into a regulated 12V DC output rated at 10A and 120W. It is built for engineers, installers and hobbyists who need a reliable supply for LED strips, CCTV systems, automation gear or bench testing. The aluminium chassis measures 200mm by 98mm by 42mm and weighs 476g, fitting DIN-rail or panel mounts in control cabinets.

Adjustable output and protection suite

A side-mounted selector sets the input range to 110V/115V or 220V/230V before power-up. The +V/ADJ terminal allows a 13% trim on the output voltage to compensate for cable drop. Built-in short-circuit, overload, over-voltage and over-temperature shutdowns protect connected loads, while an EMI filter keeps ripple and noise low for sensitive electronics. Dual +V and -V screw terminals simplify parallel wiring.

Continuous 120W headroom in 0-40°C ambients

At full load the unit delivers 120W continuously when operated in a well-ventilated environment up to 40°C ambient temperature. Humidity tolerance spans 0-95% non-condensing, and storage extends from -20°C to 60°C. The supply is not intended for battery charging, redundant hot-swap arrays or loads that exceed the 10A DC rating, and it lacks remote-sense or power-good signalling.

Priekšrocības

  • Delivers stable 12 V DC at 10 A for 120 W output
  • Accepts both 110 V and 220 V AC with manual selector switch
  • Protected against short-circuit, overload, over-voltage and over-temperature
  • Aluminium enclosure measures 200 mm × 98 mm × 42 mm weighing 476 g
  • Certified to FCC, CE and RoHS standards for safety compliance

Specifikācijas

TypeAT

Jautājumi par šo preci

Does the voltage-adjust potentiometer on the XC-120-12 wear out and need replacement?

The +V/ADJ trimmer is rated for the life of the supply; no scheduled replacement is required.

What thermal limit stops the XC-120-12 first during continuous 120 W operation?

Over-temperature protection trips when the internal temperature exceeds the design limit, shutting the unit down until it cools.

How much fan noise and heat does the XC-120-12 produce when running 12 V 10 A all day?

The aluminium chassis runs fan-less; surface temperature stays low in a 0–40 °C ambient with free airflow.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.