BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00279596BTC
Krājumā
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 288-Pin UDIMM Dell Precision 7 T1 memory upgrade
128 GB kit of four 32 GB DDR5 modules running at 5600 MT/s with CL46 latency and 1.1 V operation, built for Dell Precision 7 T1 desktops
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity from four 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- Low 1.1 V operating voltage reduces power draw
- CL46 CAS latency for responsive data access
- 288-pin UDIMM form factor fits Dell Precision 7 T1
Target system and kit layout
This 128GB kit is built for the Dell Pro Precision 7 T1 desktop and ships as four 32GB modules. Each module is a 288-pin DDR5 UDIMM running at 5600 speed with CL46 latency and 1.10V operation.
Upgrade path from lower-capacity DDR5
The kit replaces smaller DDR5 configurations in the same platform when workloads demand more simultaneous threads or larger datasets. The jump is worthwhile when the current memory limit forces paging or prevents the full core count from being fed.
Sustained-load behaviour
The 2Rx8 organisation and standard JEDEC voltage keep power draw predictable during long compute sessions. Without a heat spreader the modules rely on chassis airflow, so adequate case ventilation is required to maintain the rated 5600 transfer rate over extended periods.
Priekšrocības
- 128 GB total capacity from four 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- Low 1.1 V operating voltage reduces power draw
- CL46 CAS latency for responsive data access
- 288-pin UDIMM form factor fits Dell Precision 7 T1
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Jautājumi par šo preci
Does the 288-pin DDR5 UDIMM form factor fit the Dell Precision 7 T1 memory slots?
Yes, the kit uses standard 288-pin DDR5 UDIMM modules that match the Precision 7 T1 desktop slots.
What is the correct order for installing the four 32GB modules into the Precision 7 T1?
Populate the slots in the sequence shown in the Dell service manual, typically starting with the slot closest to the CPU, and press each module until the retention clips click.
When should the memory be tested again after the initial install?
Re-run a memory diagnostic if the system shows random crashes, data corruption or fails to recognise the full 128GB capacity.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
