BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277185BTC
Krājumā
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro BH4SR2-25G memory upgrade
128 GB kit of four 32 GB DDR5 modules at 5600 MT/s, CL46, 1.1 V, 2Rx8 unbuffered UDIMM validated for Supermicro BH4SR2-25G
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity across four 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V low voltage operation reduces power draw
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard
128GB DDR5 kit for Supermicro BH4SR2-25G
This 128GB kit contains four 32GB DDR5 5600 modules built for the Supermicro BH4SR2-25G motherboard. Each stick runs at 1.1V with CL46 timings in a 2Rx8 unbuffered UDIMM layout. The PC5-44800 rating matches the board's native memory specification.
Suited for memory-heavy workloads on the target
Workstations and servers using the BH4SR2-25G that need maximum capacity per slot will use this kit directly. Systems requiring ECC protection or registered modules cannot use this non-ECC unbuffered memory. Builders needing lower-density sticks or a different pin layout should select another product.
Steady throughput at rated voltage and timings
Under sustained load the four modules operate at the specified 1.1V and CL46 without thermal throttling from a heat spreader. The 2Rx8 organisation keeps bandwidth consistent across all populated channels during long compute or virtualisation tasks.
Priekšrocības
- 128 GB total capacity across four 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V low voltage operation reduces power draw
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G motherboard
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Jautājumi par šo preci
Does this 128 GB kit require a Supermicro BH4SR2-25G motherboard to work?
The kit is validated for the Supermicro BH4SR2-25G; other boards need DDR5 5600 UDIMM support, 288-pin slots, and 1.1 V operation.
Will my current DDR5 4800 modules run at their rated speed if I add this 5600 CL46 kit?
All installed DDR5 memory runs at the lowest common speed, so the 5600 CL46 modules will downclock to match 4800.
How can I confirm the system is using the full 128 GB at DDR5 5600 CL46 after installation?
Check BIOS or an OS tool such as Task Manager or dmidecode; it should report 128 GB, 5600 MT/s, and CL46 timings.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
