Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four green DDR5 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC UDIMM for Supermicro X14SAE-F memory upgrade

SKU CH-7EDP-78DVJ

128 GB kit of four 32 GB DDR5 5600 ECC UDIMM modules at CL46 and 1.1 V for the Supermicro X14SAE-F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB capacity across four 32 GB modules for maximum system memory
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin unbuffered UDIMM form factor fits the Supermicro X14SAE-F board requirements

128GB DDR5 ECC UDIMM kit

This NEMIX RAM kit provides 128GB of DDR5 5600 memory in four 32GB unbuffered ECC UDIMMs. It is built for the Supermicro X14SAE-F motherboard and uses 2Rx8 chips running at 1.1V with CL46 latency.

Exact-match replacement for slower DDR5

The kit matches the board's required 288-pin UDIMM form factor, voltage and rank layout so the memory controller recognises full capacity at rated speed. Upgrading is worth it when your current modules limit capacity or run below 5600 MT/s.

Suits Supermicro X14SAE-F builders needing ECC

Buyers who need registered DIMMs, SODIMMs or non-ECC memory should look elsewhere. The kit also does not fit platforms that require a different pin count, voltage or DDR generation.

Priekšrocības

  • 128 GB capacity across four 32 GB modules for maximum system memory
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin unbuffered UDIMM form factor fits the Supermicro X14SAE-F board requirements

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will these 288-pin DDR5 modules fit the Supermicro X14SAE-F motherboard?

Yes, the kit is built as 288-pin DDR5 ECC UDIMM modules, which is the exact form factor the X14SAE-F requires.

What is the correct installation order for the four 32GB sticks?

Populate the slots in the sequence shown in the X14SAE-F manual; the board expects a specific population order for 2Rx8 modules to run at 5600MHz.

Do the modules need active cooling or heat-spreader maintenance later?

No heat spreader is fitted, so only ensure case airflow keeps the bare DRAM within its 1.10V operating envelope; no periodic maintenance is required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.