BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277453BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 260-PIN SODIMM NAS memory upgrade for QNAP TVS-472XT TVS-672XT TVS-872XT
A 16 GB DDR4 SODIMM kit running at 2400 MT/s with CL17 latency for QNAP TVS-472XT, TVS-672XT and TVS-872XT NAS units
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 kit boosts NAS capacity
- 2400 MT/s DDR4 speed matches system specs
- CL17 latency supports stable data handling
- 2 V operation keeps power draw low
- Validated for QNAP TVS-472XT TVS-672XT TVS-872XT
Targeted QNAP NAS Upgrade
This 16 GB kit contains two 8 GB DDR4 2400 SODIMM modules built for the QNAP TVS-472XT, TVS-672XT and TVS-872XT. It is aimed at administrators who want to expand memory capacity in those specific NAS units without mixing different module specifications.
Not for ECC or higher-speed requirements
The modules are non-ECC and unbuffered, so they do not suit systems that mandate error-correcting code memory. Buyers needing registered DIMMs, ECC support or speeds above 2400 MT/s must select a different kit validated for their platform.
DDR4 2400 CL17 260-pin SODIMM
The decisive specification is the DDR4 2400 MT/s CL17 260-pin SODIMM form factor at 1.2 V. Only NAS models that accept this exact module type will recognise and run the kit at its rated timing.
Priekšrocības
- 16 GB DDR4 kit boosts NAS capacity
- 2400 MT/s DDR4 speed matches system specs
- CL17 latency supports stable data handling
- 2 V operation keeps power draw low
- Validated for QNAP TVS-472XT TVS-672XT TVS-872XT
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS19200-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Jautājumi par šo preci
Should I pick the 16GB kit or a single 8GB module for my QNAP TVS-472XT?
The 16GB kit provides two matched 8GB modules for dual-channel operation, while a single module would run in single-channel mode and leave the second slot empty.
What does the 2400MHz rating mean once installed in a TVS-672XT?
The modules run at DDR4 2400 speeds; if the system defaults to 2666MHz, the memory will downclock to 2400MHz to maintain stability.
Is the 260-pin SODIMM interface compatible with my TVS-872XT and what speed does it cap at?
Yes, the 260-pin DDR4 SODIMM fits the NAS slots and the kit is rated for PC4-19200 bandwidth at CL17 latency.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
