BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276899BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM NAS memory upgrade for QNAP TVS-673 TVS-873
A 16 GB DDR4 SODIMM kit running at 2400 MHz CL17 1.2 V for QNAP TVS-673 and TVS-873 NAS units
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts NAS responsiveness
- DDR4 2400 CL17 matches QNAP TVS-673 and TVS-873 specs
- 2 V low-voltage operation reduces heat and power draw
- 260-pin SODIMM form factor fits directly into NAS memory slots
- Major OEM chips from Samsung, Micron or Hynix ensure reliability
QNAP TVS-673 & TVS-873 memory kit
This 16 GB kit contains two 8 GB DDR4 SODIMM modules built for QNAP TVS-673 and TVS-873 NAS units. It suits administrators who need extra capacity for virtual machines or heavy file services on those specific models. Each module runs at 1.2 V without ECC or buffering. The 260-pin form factor matches the factory slots exactly.
Sustained workload behaviour
Modules are stress tested under load before shipping to verify stability during long backup windows or continuous indexing jobs. Unbuffered DDR4 at CL17 latency keeps timing predictable when the NAS serves multiple users simultaneously. The 1Rx8 rank organisation helps the memory controller maintain steady throughput without rank interleaving delays.
DDR4 SODIMM interface limits
The PC4-19200 rating caps bandwidth at the DDR4 2400 transfer rate even though the platform supports DDR4 2666. Non-ECC operation means single-bit errors are not corrected automatically, so critical databases should use application-level checksums. Builders who need ECC protection or higher density per slot must select a different module specification.
Priekšrocības
- 16 GB dual-channel kit boosts NAS responsiveness
- DDR4 2400 CL17 matches QNAP TVS-673 and TVS-873 specs
- 2 V low-voltage operation reduces heat and power draw
- 260-pin SODIMM form factor fits directly into NAS memory slots
- Major OEM chips from Samsung, Micron or Hynix ensure reliability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Compatible Series Memory |
| Model | QNAP DDR4 2666MHZ ECC Unbuffered SODIMM NAS Memory |
| Part Number | MS19200-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Qnap |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
Jautājumi par šo preci
How much power does the 1.2 V DDR4 kit draw when the QNAP TVS-673 runs 24/7?
Each 8 GB module operates at 1.2 V, the standard DDR4 voltage, keeping power draw low during continuous NAS operation.
Does the TVS-873 need anything beyond the two 260-pin SODIMM slots to use this 16 GB kit?
The TVS-873 provides two DDR4 SODIMM slots; inserting both modules fills the available sockets and no extra hardware is required.
Will the CL17 2400 MHz modules work alongside the original 2666 MHz sticks already in my QNAP?
The NAS will run all installed memory at the lowest common speed, so the 2400 MHz kit will operate stably with existing 2666 MHz modules.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
