SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00498848BTC
Krājumā
NEMIX RAM
NEMIX RAM 16GB DDR4 2933 RDIMM ECC CL21 1.2V 2Rx8 288-pin Dell PowerEdge R840 memory upgrade
16 GB DDR4 2933 ECC registered RDIMM, CL21 1.2 V 2Rx8 288-pin for Dell PowerEdge R840
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity expands server memory headroom
- DDR4 2933 speed matches Dell PowerEdge R840 specifications
- ECC registered design protects data integrity under load
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
Dell PowerEdge R840 DDR4 RDIMM
This NEMIX RAM module provides 16 GB of DDR4 2933 registered ECC memory for the Dell PowerEdge R840 rack server. It operates at 1.2 V with a CAS latency of CL21 and uses a 2Rx8 organisation on a 288-pin RDIMM form factor. The part is built with major OEM chips from Samsung, Micron or Hynix and carries the supplier part number MR23400-628K1.
IT teams maintaining R840 fleets
Administrators expanding memory in a Dell PowerEdge R840 will find this module validated for that platform. Builders working on non-Dell servers, desktop workstations or consumer motherboards should look elsewhere because the registered ECC design requires a compatible server chipset and memory controller.
Registered ECC DDR4 2933 CL21
The single specification that determines fit is the registered ECC DDR4 2933 CL21 2Rx8 288-pin RDIMM profile at 1.2 V. Only systems that explicitly support this exact combination of speed, latency, rank structure and registered signalling will accept the module.
Priekšrocības
- 16 GB capacity expands server memory headroom
- DDR4 2933 speed matches Dell PowerEdge R840 specifications
- ECC registered design protects data integrity under load
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR4 2933MHZ RDIMM Registered Server Memory |
| Part Number | MR23400-628K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Dell |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
Jautājumi par šo preci
Does this RDIMM require a Dell PowerEdge R840 server to function?
This module is built for the Dell PowerEdge R840 and operates as registered ECC DDR4; the server must accept 288-pin DDR4 RDIMMs at 2933 MT/s with 1.20 V.
Can I mix this 16 GB 2Rx8 CL21 stick with existing DDR4 RDIMMs running at a lower speed?
The R840 will down-clock all modules to the slowest installed speed and use the loosest timing, so mixing works but the faster 2933 MT/s rating on this stick will not be used.
How do I verify the module is running at 2933 MT/s with ECC active after installation?
Enter the system BIOS or iDRAC and confirm the memory speed shows 2933 MT/s, the rank reads 2Rx8, and ECC status reports enabled.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
