SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00504797BTC
Krājumā
NEMIX RAM
NEMIX RAM 256GB (2x128GB) DDR5 5600 CL46 4Rx4 1.1V ECC RDIMM memory upgrade
A 256 GB dual-module DDR5 kit with ECC, registered 4Rx4 ranks, CL46 latency and 1.1 V operation for Supermicro servers
- Capacity256GB (2 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity across two 128 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered RDIMM design for server data integrity
- 1 V operating voltage reduces power draw
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
Compatible Server Memory Kit
This NEMIX RAM kit delivers 256GB of DDR5 ECC registered memory in a matched pair of 128GB modules. It is built for Supermicro MBD-X13DGU AI SuperServer motherboards that require registered DIMMs with error correction. The modules operate at 5600MHz with CL46 latency and a low 1.1V supply.
Platform Requirements
Your motherboard must support DDR5 RDIMM modules in a 288-pin form factor and accept 4Rx4 density at the rated speed. Verify that the BIOS revision on the Supermicro board lists this capacity and rank configuration as supported. The system must also provide ECC and registered memory functionality for the kit to operate correctly.
Ideal Use Cases
This kit suits administrators expanding memory capacity in compatible Supermicro AI and HPC servers where registered ECC stability is mandatory. It is not intended for consumer desktop boards that lack RDIMM support or for systems limited to lower maximum capacities per slot. Buyers needing unbuffered or non-ECC DDR5 should select a different product.
Priekšrocības
- 256 GB total capacity across two 128 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth rating
- ECC registered RDIMM design for server data integrity
- 1 V operating voltage reduces power draw
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (2X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Jautājumi par šo preci
Does the 256 GB kit include both 128 GB modules or must the second stick be purchased separately?
The package contains two 128 GB DDR5 5600 RDIMMs for a total of 256 GB; no additional modules are required.
When should I choose the CL46 5600 version instead of the 4800 alternative?
Select the 5600 CL46 kit when the SuperMicro X13DGU motherboard supports the higher data rate, as it delivers greater bandwidth at the same 1.1 V.
What does the 5600 MT/s rating mean once the modules are installed in the SuperMicro X13DGU?
The memory will run at up to 5600 MT/s (PC5-44800) with CL46 latency, providing registered ECC bandwidth for AI and server workloads.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
