SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00499535BTC
Krājumā
NEMIX RAM
NEMIX RAM 256GB (4x64GB) DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM SuperMicro AS-2116GT-HNTF memory upgrade
A 256GB DDR5 ECC RDIMM kit of four 64GB modules running at 6400MHz CL52 1.1V for the SuperMicro AS-2116GT-HNTF server
- Capacity256GB (4 x 64GB)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 256 GB kit expands server capacity for heavy workloads
- Four 64 GB modules fill four slots in matched configuration
- DDR5 6400 MHz speed moves data quickly through registered channels
- ECC and registered design protects data integrity in critical tasks
- 1 V operation lowers power draw per module
System-Specific DDR5 Kit
This NEMIX RAM kit delivers 256GB across four 64GB DDR5 modules rated at 6400MHz with CL52 latency. The registered ECC RDIMM design operates at 1.1V using 2Rx4 organisation on a 288-pin form factor. It is built for the SuperMicro GrandTwin A+ Server AS-2116GT-HNTF.
Compatibility and Use Case
Suits administrators expanding memory in the named SuperMicro platform where registered ECC DDR5 is required. Not for desktop boards that accept only unbuffered non-ECC memory, nor for systems limited to lower densities or different pin counts. Buyers needing unregistered DIMMs should look elsewhere.
Deciding Specification
The registered ECC RDIMM interface with 2Rx4 architecture at 1.1V determines fit. Only platforms that explicitly support this module type and voltage will recognise the full 256GB capacity.
Priekšrocības
- 256 GB kit expands server capacity for heavy workloads
- Four 64 GB modules fill four slots in matched configuration
- DDR5 6400 MHz speed moves data quickly through registered channels
- ECC and registered design protects data integrity in critical tasks
- 1 V operation lowers power draw per module
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K4 |
| Capacity | 256GB (4 x 64GB) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB (4 x 64GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Does the SuperMicro AS-2116GT-HNTF server require a specific BIOS version or CPU generation to recognise the 6400MHz DDR5 RDIMMs?
The kit is validated for the SuperMicro GrandTwin A+ AS-2116GT-HNTF; consult the server manual for any BIOS or CPU requirements before installing the 256GB modules.
Can I mix these 2Rx4 ECC RDIMMs with existing single-rank DDR5 modules already installed in the AS-2116GT-HNTF?
Mixing 2Rx4 registered ECC modules with different rank or speed DIMMs is not recommended; populate all four slots with this matched 64GB kit for stable operation.
How do I confirm the 256GB kit is running at 6400MHz CL52 after installation?
Enter the BIOS or use a system-information tool to verify the memory reports DDR5-6400, CAS latency 52 and the full 256GB capacity across all four slots.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
