BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276426BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 1.1V UDIMM for ASUS ProArt Z790-CREATOR WiFi memory upgrade
32 GB DDR5 kit with two 16 GB UDIMMs at 4800 MT/s CL40, 1.1 V, validated for the ASUS ProArt Z790-CREATOR WiFi motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit boosts multitasking headroom
- 4800 MT/s DDR5 speed feeds data faster
- CL40 latency keeps responses tight
- 1 V operation reduces power draw
- 288-pin UDIMM fits ASUS ProArt Z790-CREATOR WiFi
Targeted DDR5 Upgrade
This 32GB kit contains two 16GB DDR5 4800 modules built for the ASUS ProArt Z790-CREATOR WiFi motherboard. The PC5-38400 specification matches the board's native memory speed. Non-ECC unbuffered operation suits desktop workloads and content-creation tasks that do not require registered memory.
Low-Voltage Thermals
Each module runs at 1.1V without a heat spreader, keeping power draw modest and leaving headroom for the CPU cooler. The 1Rx8 organisation and standard 288-pin UDIMM form factor allow normal airflow through the memory slots. No active cooling is required for stock-speed operation.
Build Integration
Two occupied DIMM slots leave the remaining slots free for future expansion up to the board's maximum capacity. The kit frees the builder from sourcing matched pairs individually. Buyers who want more storage or need ECC registered modules should look at server-oriented product lines.
Priekšrocības
- 32 GB kit boosts multitasking headroom
- 4800 MT/s DDR5 speed feeds data faster
- CL40 latency keeps responses tight
- 1 V operation reduces power draw
- 288-pin UDIMM fits ASUS ProArt Z790-CREATOR WiFi
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Server Motherboard Compatible Series Memory |
| Model | ASUS DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
How do I install the 288-pin DDR5 modules in the ASUS ProArt Z790-CREATOR WiFi, and what step is often missed?
Align the notch on each 288-pin module with the slot key, press firmly until both side clips click, then enter the BIOS to confirm the kit runs at DDR5 4800 CL40 1.1V.
What maintenance or replacement will the 32GB (2x16GB) DDR5 4800 CL40 kit need later?
No scheduled maintenance is required; the unbuffered non-ECC UDIMMs have no heat spreader, so keep the case airflow clear and replace only if a module fails.
What limit appears first under sustained load with these 1Rx8 1.1V DDR5 4800 modules?
The CL40 latency at DDR5 4800 is the first bottleneck during prolonged heavy workloads, as the fixed timing and 1.1V voltage cap further overclocking headroom.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
