BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276732BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 SODIMM SuperMicro X13SAV-PS memory upgrade
A 32 GB DDR5 SODIMM kit running at 4800 MT/s with CL40 latency, built for the SuperMicro X13SAV-PS motherboard
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB total capacity with two 16 GB modules
- DDR5 4800 MT/s speed for responsive system performance
- CL40 CAS latency at 1.1 V operating voltage
- 262-pin SODIMM form factor fits SuperMicro X13SAV-PS
- Non-ECC unbuffered design using major OEM chips
Compatible DDR5 SODIMM kit for SuperMicro X13SAV-PS
This 32 GB kit contains two 16 GB DDR5 modules built for the SuperMicro X13SAV-PS Mini-ITX embedded motherboard. Each stick is a 262-pin unbuffered SODIMM with a 1Rx8 layout. The kit targets system integrators and embedded developers who need a validated memory upgrade for that specific platform.
Standard voltage and unbuffered design
Modules run at the JEDEC standard 1.1 V, keeping power draw low in typical embedded workloads. The absence of a heat spreader and the unbuffered architecture suit fanless or space-constrained chassis where airflow is limited. CAS latency is CL40 at the rated 4800 MT/s speed.
Sustained load behaviour without ECC
Under continuous operation the memory maintains its rated frequency and timings without error correction. The single-rank organisation helps keep signal integrity stable during long compute sessions. Buyers who need ECC protection or registered DIMMs for multi-socket servers should look elsewhere.
Priekšrocības
- 32 GB total capacity with two 16 GB modules
- DDR5 4800 MT/s speed for responsive system performance
- CL40 CAS latency at 1.1 V operating voltage
- 262-pin SODIMM form factor fits SuperMicro X13SAV-PS
- Non-ECC unbuffered design using major OEM chips
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 4800MHz PC5-38400 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Jautājumi par šo preci
How do I install the 262-pin SODIMM modules in the SuperMicro X13SAV-PS, and what step is often missed?
Power off and unplug the board, open the SODIMM slots, insert each 1Rx8 module at the correct angle until the side clips click, then verify in BIOS that both 16 GB sticks are detected at 4800 MT/s.
What maintenance or replacement will this DDR5 kit need over time?
No scheduled maintenance is required; the modules have no heat spreader and run at 1.1 V, so only replace them if a memory test reports errors or you need more than 32 GB total capacity.
What limit appears first when the memory runs under sustained load?
The CL40 latency at 4800 MT/s is the fixed timing ceiling; bandwidth and latency cannot exceed the JEDEC DDR5-4800 specification built into these 1Rx8 SODIMMs.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
