BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277632BTC
Krājumā
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 4800 CL40 SODIMM SuperMicro X13SRN-H compatible memory upgrade
32 GB kit of two 16 GB DDR5 4800 CL40 SODIMM modules for SuperMicro X13SRN-H systems
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands server capacity for heavy workloads
- Dual 16 GB modules enable dual-channel bandwidth
- DDR5 4800 MT/s transfers data at PC5-38400 speed
- Low 1.10 V voltage reduces power draw and heat
- 262-pin SODIMM fits SuperMicro X13SRN-H motherboard
NEMIX RAM 32GB DDR5 4800 SODIMM Kit
This 32GB kit contains two 16GB DDR5 4800 SODIMM modules built for the SuperMicro X13SRN-H motherboard. It runs at 1.1V with CL40 latency and uses 1Rx8 unbuffered non-ECC chips. The 262-pin form factor fits compatible Supermicro server and workstation platforms.
Suitable for X13SRN-H upgrades needing 32GB
This kit suits administrators expanding a SuperMicro X13SRN-H system to 32GB with validated DDR5 4800 modules. It is not for buyers who need ECC error correction, registered buffering, higher capacities, or different DDR generations. Systems requiring those features should look elsewhere.
Simple SODIMM installation on supported boards
Installation follows standard SODIMM procedure: power down, open the chassis, align the 262-pin modules with the slots, and press until the latches engage. The main risk is purchasing for an unsupported platform; the kit is validated only for the X13SRN-H, so verify your exact motherboard model before ordering.
Priekšrocības
- 32 GB kit expands server capacity for heavy workloads
- Dual 16 GB modules enable dual-channel bandwidth
- DDR5 4800 MT/s transfers data at PC5-38400 speed
- Low 1.10 V voltage reduces power draw and heat
- 262-pin SODIMM fits SuperMicro X13SRN-H motherboard
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
Jautājumi par šo preci
Does the SuperMicro X13SRN-H motherboard need DDR5 slots to use this 262-pin kit?
Yes, the modules are 262-pin DDR5 SODIMMs and require a motherboard with DDR5 SODIMM sockets.
Can I keep my existing DDR5 4800 CL40 SODIMMs and add this 32 GB kit alongside them?
The kit runs at 4800 MT/s with CL40 latency and 1.10 V; matching modules of the same speed, latency and voltage will operate together.
How do I confirm the system sees the full 32 GB at 4800 MT/s after installation?
Check the BIOS memory information or OS task manager — it should report 32 GB total capacity and a speed of 4800 MT/s.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
