Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 RDIMM modules with black chips, no heat spreader, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 6400MHz CL52 1.1V ECC RDIMM SuperMicro AS-2116GT-HNTF memory upgrade

SKU CH-CAA0-NC4SQ

ECC registered DDR5 kit adds 32 GB across two 16 GB modules at 6400 MHz CL52 for the SuperMicro GrandTwin AS-2116GT-HNTF

  • Capacity32GB (2 x 16GB)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 32GB total capacity from two 16GB modules
  • DDR5 6400MHz speed for fast data transfer
  • ECC registered design corrects errors automatically
  • Low 1.1V voltage reduces power consumption
  • Built for SuperMicro GrandTwin AS-2116GT-HNTF

32 GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 32 GB of DDR5 memory in a matched pair of 16 GB modules. Each module is a 288-pin registered DIMM with ECC and a CAS latency of CL52. The kit runs at 6400 MHz with a low 1.10 V operating voltage. It is validated for the SuperMicro GrandTwin A+ Server AS-2116GT-HNTF.

Suitable for registered ECC slots only

This memory fits systems that accept DDR5 registered ECC RDIMMs and cannot be used in platforms requiring unbuffered or non-ECC modules. Builders needing consumer SO-DIMMs or standard UDIMMs should look elsewhere. The 1Rx8 organisation also means it suits boards wired for that rank configuration.

6400 MHz CL52 registered ECC spec

The decisive specification is the DDR5 6400 MHz CL52 registered ECC profile at 1.10 V. If the target server requires a different speed, latency, voltage or memory type, this kit will not be compatible. Verify the motherboard memory list against these exact parameters before purchase.

Priekšrocības

  • 32GB total capacity from two 16GB modules
  • DDR5 6400MHz speed for fast data transfer
  • ECC registered design corrects errors automatically
  • Low 1.1V voltage reduces power consumption
  • Built for SuperMicro GrandTwin AS-2116GT-HNTF

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K2
Capacity32GB (2 x 16GB)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB (2 x 16GB) DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Jautājumi par šo preci

What motherboard slot does the 288-pin DDR5 RDIMM kit require?

The kit uses 288-pin DDR5 RDIMM modules that install directly into the server's DDR5 RDIMM slots on the SuperMicro AS-2116GT-HNTF motherboard.

Can the 1Rx8 registered ECC modules run with older non-ECC UDIMMs?

No, registered ECC RDIMMs and non-ECC UDIMMs use different signalling and cannot be mixed in the same system.

How do I confirm the 6400 MHz CL52 speed is active after install?

Enter the system BIOS or UEFI and verify the memory frequency reads 6400 MT/s with CAS latency 52.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.