NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
32 GB DDR5 ECC RDIMM running at 4800 MT/s with CL40 latency and 1.1 V operation
This NEMIX RAM module delivers 32 GB of DDR5 memory at 4800 MT/s with CL40 latency and 1.10 V operation. It uses a 1Rx4 registered ECC design on a 288-pin RDIMM form factor for data-integrity workloads. Major OEM chips from Samsung, Micron or Hynix are used. No heat spreader is fitted.
Systems that accept only unbuffered non-ECC UDIMMs cannot use this module. Boards lacking DDR5 support will not fit the 288-pin DDR5 keying. Workstations requiring higher capacity per slot or lower latency should consider other options.
The PC5-38400 rating confirms 4800 MT/s data transfer for compatible server motherboards. Verify your platform supports this speed and registered ECC DIMMs before purchase. The CL40 timing and 1Rx4 organisation are fixed by the module design.
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Series Server Memory |
| Model | Hynix Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-314 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
The module runs at 4800 MT/s; actual throughput depends on the motherboard memory controller and the number of populated channels.
It requires a DDR5 RDIMM slot with 288 pins and 1.1 V support; the module has no heat spreader, so it fits standard DIMM spacing.
Install with power off, seat firmly until the clips lock, then enable ECC in the system BIOS so the registered buffer and error correction become active.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?