BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277887BTC
Krājumā
NEMIX RAM
NEMIX RAM 384GB 6x64GB DDR5 6400 CL52 2Rx4 1.1V RDIMM Supermicro H14DSG-OD memory upgrade
A 384GB kit of six 64GB DDR5 6400 CL52 2Rx4 1.1V 288-pin ECC registered RDIMMs built for the Supermicro H14DSG-OD motherboard
- Capacity384GB (6 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from six 64 GB modules for maximum server memory density
- DDR5-6400 PC5-51200 speed with CL52 latency for rated performance on Supermicro H14DSG-OD
- Registered ECC RDIMM architecture with 2Rx4 organization offloads the memory controller and corrects single-bit errors
- 1 V operation at 288-pin DDR5 form factor matches the motherboard's exact voltage and slot requirements
- Validated compatibility with Supermicro H14DSG-OD ensures full-capacity recognition and stable population
System-Specific DDR5 Kit for Supermicro H14DSG-OD
This 384GB kit contains six 64GB DDR5 RDIMM modules built for the Supermicro H14DSG-OD motherboard. It targets administrators upgrading memory capacity in compatible servers. The registered ECC design meets enterprise reliability requirements for production workloads.
Registered ECC DDR5 6400 CL52 2Rx4 at 1.1V
The decisive specification is the 2Rx4 registered ECC configuration running at DDR5 6400 with CL52 latency and 1.1V. This exact rank, voltage and timing combination matches the memory controller expectations so the system recognises the full 384GB at rated speed.
Six 288-Pin RDIMMs Populate Compatible Slots
Six 288-pin RDIMMs fill the supported DIMM slots on the H14DSG-OD following the board's population rules. Registered buffering offloads the memory controller for stable fully-populated operation while ECC corrects single-bit errors. Verify the manual for approved population order before installation.
Priekšrocības
- 384 GB total capacity from six 64 GB modules for maximum server memory density
- DDR5-6400 PC5-51200 speed with CL52 latency for rated performance on Supermicro H14DSG-OD
- Registered ECC RDIMM architecture with 2Rx4 organization offloads the memory controller and corrects single-bit errors
- 1 V operation at 288-pin DDR5 form factor matches the motherboard's exact voltage and slot requirements
- Validated compatibility with Supermicro H14DSG-OD ensures full-capacity recognition and stable population
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K6 |
| Capacity | 384GB (6 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 6X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
What does the 6400 MT/s rating actually deliver when all six slots are populated?
The kit runs at DDR5-6400 with CL52 timings at 1.1 V across all six registered DIMMs, giving the full 384 GB capacity at rated speed.
How does the registered ECC design affect the memory controller on this motherboard?
Registered buffering reduces electrical load on the controller so every slot can run fully populated, while ECC corrects single-bit errors in real time.
Will these 288-pin RDIMMs physically seat in the Supermicro H14DSG-OD?
Yes, the 288-pin registered form factor matches the board's DDR5 RDIMM slots exactly.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
