SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00504797BTC
Krājumā
NEMIX RAM
NEMIX RAM 384GB (8 x 48GB) DDR5 6400 CL52 2Rx8 1.1V ECC RDIMM for Supermicro H14DSG-O-CPU
384 GB DDR5 ECC registered server memory kit with eight 48 GB modules at 6400 MT/s, CL52, 1.1 V, validated for the Supermicro H14DSG-O-CPU motherboard
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity from eight 48 GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- 2Rx8 registered ECC architecture corrects single-bit errors and offloads the controller
- 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU slot and population rules
- Built with major OEM Samsung, Micron or Hynix components for enterprise reliability
384GB DDR5 ECC RDIMM kit for Supermicro H14DSG-O-CPU
This 384GB kit contains eight 48GB DDR5 6400 RDIMM modules rated CL52 at 1.1V. Registered ECC architecture with 2Rx8 organisation lets the Supermicro H14DSG-O-CPU memory controller address every slot at full rated speed without downclocking.
Verified fitment replaces mixed-capacity
The exact-match 288-pin RDIMM form factor, 2Rx8 rank structure and 1.1V operating voltage satisfy the board's population rules so all fourteen slots can be filled at the specified 6400 MT/s data rate. Buyers who need a different capacity per module or a UDIMM form factor cannot use this kit.
Registered buffering sustains throughput under
The registered buffer reduces electrical load on the memory controller while on-die ECC corrects single-bit errors in real time, preventing silent data corruption during extended compute or virtualisation workloads. Operation remains stable at the rated 6400 MT/s without thermal throttling or voltage drift.
Priekšrocības
- 384 GB total capacity from eight 48 GB modules for maximum density
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- 2Rx8 registered ECC architecture corrects single-bit errors and offloads the controller
- 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU slot and population rules
- Built with major OEM Samsung, Micron or Hynix components for enterprise reliability
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Will the 288-pin DDR5 RDIMM modules fit the DIMM slots on my Supermicro H14DSG-O-CPU motherboard?
Yes, the 288-pin RDIMM form factor is the exact type the Supermicro H14DSG-O-CPU requires; UDIMM or SODIMM modules will not fit.
What is the correct installation sequence for the eight 48 GB modules on the Supermicro H14DSG-O-CPU?
Populate all eight slots following the motherboard manual's specified DIMM population order; installing them in the wrong sequence can prevent the system from recognising the full 384 GB capacity.
Do these registered ECC modules need any firmware updates or periodic maintenance after installation?
No firmware updates or routine maintenance are required; the modules operate at 1.10 V with CL52 timing, and ECC error correction runs automatically for the life of the kit.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
