Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 PC5-38400 2Rx8 CL40 1.1V ECC RDIMM Supermicro H13SSW memory upgrade

SKU CH-SJ6W-E89SE

48 GB DDR5 4800 ECC registered RDIMM, 2Rx8 CL40 at 1.1 V, 288-pin, validated for Supermicro H13SSW

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

Skatīt vēl 24 konfigurācijas

Speed 4800MHz

  • 48 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed delivers rated bandwidth without down-clocking
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the platform's voltage requirement for reliable initialisation
  • 288-pin RDIMM form factor fits the Supermicro H13SSW motherboard exactly

48GB DDR5 RDIMM for Supermicro H13SSW

This 48GB DDR5 4800 PC5-38400 module is a registered ECC RDIMM built for the Supermicro H13SSW motherboard. It operates at 1.1V with CL40 latency and a 2Rx8 rank structure. The 288-pin form factor matches the board's DIMM slots exactly. System administrators upgrading compatible Supermicro servers use this memory to expand capacity with assured fitment.

Suits servers needing registered ECC at 4800 MT/s

This module suits environments that require registered ECC DDR5 at the native 4800 speed with 1.1V operation. It is not for systems that accept only unbuffered UDIMMs or SODIMM form factors. Builders needing speeds above 4800 or lower CAS latencies should look elsewhere. Workstations without ECC support in the memory controller will not benefit from the error-correction feature.

2Rx8 rank and 1.1V define compatibility

The single specification that decides fitment is the 2Rx8 registered rank combined with 1.1V DDR5 signalling. The Supermicro H13SSW memory controller expects this exact rank structure and voltage to initialise the DIMM at full capacity and rated speed. A different rank count or voltage will prevent the server from posting or force reduced performance. Verify the motherboard manual for approved population rules before installation.

Priekšrocības

  • 48 GB capacity expands server memory headroom for demanding workloads
  • DDR5 4800 speed delivers rated bandwidth without down-clocking
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the platform's voltage requirement for reliable initialisation
  • 288-pin RDIMM form factor fits the Supermicro H13SSW motherboard exactly

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 2Rx8 registered DIMM need any firmware updates or module replacements during its service life?

Registered ECC RDIMMs like this 48 GB DDR5 4800 module are solid-state with no moving parts or firmware; they run until a rare cell failure triggers ECC correction, at which point the module is simply replaced.

What limit appears first when the Supermicro H13SSW runs this 1.1 V DDR5 kit at full load continuously?

The memory controller’s thermal and power envelope is reached before the DIMM’s own 1.10 V rating, so sustained throughput is capped by the platform’s cooling and population rules rather than the module itself.

How much noise and heat does this 288-pin RDIMM add when the server runs all day?

The module has no heat spreader or fan; it draws 1.1 V at DDR5 4800 and relies on the chassis airflow, so it contributes negligible acoustic noise and only modest heat to the system’s overall thermal load.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.