SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00498556BTC
Krājumā
NEMIX RAM
NEMIX RAM 512GB (8 x 64GB) DDR5 6400 CL52 2Rx4 ECC Registered RDIMM memory upgrade for Supermicro H14DST-FL
Eight 64 GB DDR5 RDIMMs at 6400 MT/s with CL52, 1.1 V, ECC and registered buffering, verified for the Supermicro H14DST-FL
- Capacity512GB (8 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 512 GB total capacity from eight 64 GB modules
- DDR5-6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects single-bit errors automatically
- 10 V operation matches the motherboard specification
- 288-pin RDIMM form factor fits the Supermicro H14DST-FL
Exact-fit DDR5 kit for Supermicro H14DST-FL
This 512GB kit contains eight 64GB registered ECC RDIMMs built to the DDR5 6400 standard at 1.10V. It matches the rank, voltage and timing the motherboard's memory controller expects so every slot is recognised at full capacity and rated speed.
Registered DDR5 6400 interface limits
The 288-pin RDIMM form factor is required; UDIMM or SODIMM modules will not fit or function. Registered buffering offloads the memory controller to allow full population at the rated 6400MT/s, while ECC corrects single-bit errors on the fly.
512GB capacity with eight 64GB modules
Eight dual-rank 2Rx4 DIMMs fill all available slots for maximum density. Headroom ends when the board's supported capacity or population rules are reached; consult the system manual for approved configurations before installation.
Priekšrocības
- 512 GB total capacity from eight 64 GB modules
- DDR5-6400 speed with CL52 latency for rated throughput
- Registered ECC design corrects single-bit errors automatically
- 10 V operation matches the motherboard specification
- 288-pin RDIMM form factor fits the Supermicro H14DST-FL
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Jautājumi par šo preci
Should I buy the 512GB kit or build the same capacity from individual 64GB modules?
The kit ships as eight matched 64GB RDIMMs tested together, so the memory controller sees identical rank, timing and voltage across every slot — something that is not guaranteed when modules are purchased separately.
Will the DDR5-6400 CL52 rating actually run at that speed in my Supermicro H14DST-FL?
Yes, the modules are spec-matched to the board's qualified vendor list, so the memory controller will initialise them at 6400 MT/s with CL52 timings at 1.1V when all eight slots are populated.
What does the 288-pin RDIMM interface limit in a fully populated server?
The registered 288-pin RDIMM format is required by the H14DST-FL; it buffers address and command signals so the memory controller can drive all eight slots at the rated 6400 MT/s without signal degradation.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
