BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276429BTC
Krājumā
NEMIX RAM
NEMIX RAM 576GB (6x96GB) DDR5 4800 CL40 ECC RDIMM HDX-QN8-52E4 High-Density memory upgrade
A 576 GB DDR5 registered ECC memory kit of six 96 GB modules running at 4800 MT/s with CL40 latency for Thinkmate HDX-QN8-52E4 servers
- Capacity576GB (6 x 96GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 576 GB total capacity lets memory-hungry workloads run without swapping
- Six 96 GB modules populate all channels for maximum bandwidth
- DDR5 4800 speed delivers 38400 MT/s data rates for high-throughput tasks
- ECC registered design detects and corrects errors to keep critical data intact
- 1 V operation reduces power draw in dense server configurations
High-density DDR5 server kit
This 576GB kit consists of six 96GB DDR5 4800 RDIMM modules built for Thinkmate HDX-QN8-52E4 high-density servers. Each module runs at 1.1V with CL40 latency and uses 2Rx8 registered ECC chips from major OEM suppliers. The 288-pin form factor fits the target platform without adapters.
Suited for memory-heavy workloads
IT teams running virtualisation, in-memory databases or large-scale analytics on the compatible Thinkmate platform will benefit from the registered ECC design and 576GB total capacity. Builders needing consumer desktop memory, non-ECC modules or lower-density kits for standard workstations should look elsewhere.
Registered ECC RDIMM requirement
The motherboard must accept 288-pin DDR5 RDIMM modules with registered ECC signalling at 4800 MT/s. Systems that only support unbuffered UDIMMs or a different pin layout cannot use this kit.
Priekšrocības
- 576 GB total capacity lets memory-hungry workloads run without swapping
- Six 96 GB modules populate all channels for maximum bandwidth
- DDR5 4800 speed delivers 38400 MT/s data rates for high-throughput tasks
- ECC registered design detects and corrects errors to keep critical data intact
- 1 V operation reduces power draw in dense server configurations
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9628K6 |
| Capacity | 576GB (6 x 96GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 576GB (6X96GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Jautājumi par šo preci
Will these 288-pin DDR5 RDIMMs fit the memory slots on my THINKMATE HDX-QN8-52E4 server?
Yes, the kit is built as a direct match for the THINKMATE HDX-QN8-52E4 high-density platform, using the standard 288-pin DDR5 RDIMM form factor that the system expects.
What is the correct order for populating the six 96 GB modules during installation?
Follow the server manual’s population sequence for 2Rx8 registered DIMMs; the common mistake is skipping a required slot or mixing ranks, which prevents the system from recognising the full 576 GB.
How do I know when a module in this 6 x 96 GB kit needs to be replaced?
ECC will log correctable errors in the system event log; a rising count or an uncorrectable error on a specific DIMM signals that module should be swapped under the lifetime replacement coverage.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
