Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR4 LRDIMM module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB 1Rx64 DDR4 2400 CL17 1.2V 288-pin ECC LRDIMM ASRock ROMED8-2T EPYC memory upgrade

SKU CH-43BZ-ND3QN

A 64 GB DDR4 2400 ECC LRDIMM module built for ASRock EPYC server boards

  • Capacity64GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 64GB

  • 64GB capacity expands server memory for heavy workloads
  • DDR4 2400 speed delivers 19200 MT/s data throughput
  • ECC LRDIMM technology corrects errors and reduces electrical load
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin 4Rx4 module validated for ASRock ROMED8-2T EPYC platform

64 GB DDR4 ECC LRDIMM for ASRock EPYC

This 64 GB DDR4 2400 CL17 module is built for the ASRock Rack ROMED8-2T motherboard running AMD EPYC processors. It operates at 1.20 V and uses a 288-pin load-reduced form factor with 4Rx4 organisation. The part is new and validated for server workloads requiring registered ECC memory.

Suited for single-slot capacity upgrades

Administrators expanding memory on this specific platform will match the required speed, voltage and rank configuration. Builders targeting other motherboards, consumer CPUs or non-ECC systems should look elsewhere because the load-reduced design and EPYC-specific qualification limit compatibility.

4Rx4 rank layout decides platform fit

The module presents four ranks of x4 chips, a density that the ROMED8-2T memory controller expects. Boards wired for 1Rx4, 2Rx4 or 8Rx4 populations may not initialise this DIMM, so verifying the rank requirement against the system manual is the decisive step.

Priekšrocības

  • 64GB capacity expands server memory for heavy workloads
  • DDR4 2400 speed delivers 19200 MT/s data throughput
  • ECC LRDIMM technology corrects errors and reduces electrical load
  • CL17 latency at 1.2V balances responsiveness with efficiency
  • 288-pin 4Rx4 module validated for ASRock ROMED8-2T EPYC platform

Specifikācijas

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC LRDIMM Load Reduced Server Memory
Part NumberML19200-944K1
Capacity64GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredLoad Reduced
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 LRDIMM
Rank4Rx4
FeaturesDDR4 ECC LRDIMM Load Reduced Server Motherboard Compatible
Package Content64GB (1X64GB) DDR4 2400MHZ PC4-19200 4Rx4 1.2V CL17 288-PIN ECC LRDIMM Load Reduced Server Memory

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How can I confirm the 64GB DDR4 2400 CL17 LRDIMM is running at the correct speed and timings after installation?

Enter the system BIOS or UEFI and verify the memory frequency reads 2400 MT/s with CAS latency 17 at 1.2 V; the module is a 288-pin 4Rx4 load-reduced ECC DIMM so the firmware will report it as registered LRDIMM.

What is included in the package and do I need any extra parts to install it in an ASRock ROMED8-2T EPYC motherboard?

The box contains one 64 GB DDR4 2400 PC4-19200 CL17 1.2 V 288-pin ECC LRDIMM; no additional cables, brackets or heat spreaders are required for installation in the compatible ASRock server board.

Should I choose the 2400 MHz CL17 version or the 2666 MHz variant for my ASRock ROMED8-2T EPYC system?

Select the DDR4 2400 CL17 module (part ML19200-944K1) because it matches the validated speed and latency for the ROMED8-2T; the 2666 MHz label in the series name refers to the broader family, not this specific 2400 MT/s kit.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.