BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277815BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 1.2V 288-Pin UDIMM ASRock B660M
A 64 GB dual-channel DDR4 kit rated at 3200 MT/s CL22 for ASRock B660M motherboards
- Capacity64GB (2 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB total capacity from two 32 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 latency at standard 1.20 V operation
- 288-pin UDIMM form factor fits desktop slots
- Tested compatible with ASRock B660M series motherboards
Capacity and Compatibility
This NEMIX RAM kit delivers 64GB of DDR4 memory across two 32GB UDIMM modules. It is built for ASRock B660M motherboards including the PG Riptide, Phantom Gaming 4 and Pro RS models. The 288-pin unbuffered non-ECC design fits standard desktop DIMM slots.
Who This Suits
Builders upgrading an ASRock B660M board to 64GB with a matched pair of modules will find this kit validated for those specific models. Buyers who need ECC error correction, registered modules or a different motherboard platform should look elsewhere.
Deciding Specification
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.20V using a 2Rx8 organisation. This speed and timing combination determines whether the kit matches the memory controller requirements of the target board.
Priekšrocības
- 64 GB total capacity from two 32 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- CL22 latency at standard 1.20 V operation
- 288-pin UDIMM form factor fits desktop slots
- Tested compatible with ASRock B660M series motherboards
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
Does this 288-pin UDIMM kit fit the four DIMM slots on my ASRock B660M motherboard?
Yes, the kit contains two 32 GB modules built to the standard 288-pin DDR4 UDIMM form factor that matches the four slots on ASRock B660M boards.
What is the correct way to seat both 32 GB sticks so the board runs at 3200 MT/s CL22?
Install the two modules in the same-colour slots — usually slots 2 and 4 — press straight down until the retention clips click, then enable the XMP profile in BIOS to lock in 3200 MT/s CL22 at 1.2 V.
Will the Samsung, Micron or Hynix chips on these modules need any cooling or replacement over time?
The modules have no heat spreader and run at the standard 1.2 V; no active cooling or periodic replacement is required under normal desktop workloads.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
