BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277711BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro BH4SR2-25G
64 GB dual-channel DDR5 kit running at 5600 MT/s with CL46 latency for Supermicro BH4SR2-25G boards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity across two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V operating voltage for efficient power draw
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G
System-Specific DDR5 Kit
This 64 GB kit contains two 32 GB DDR5 UDIMMs built for the Supermicro BH4SR2-25G motherboard. It is intended for desktop or workstation users who need a matched pair of unbuffered non-ECC modules that the board vendor has qualified. Builders using a different platform should verify compatibility before ordering.
5600 MT/s CL46 at 1.1 V
The modules run at DDR5-5600 (PC5-44800) with a CAS latency of 46 and a nominal voltage of 1.1 V. This speed and timing combination is the single specification that determines whether the memory will operate at its rated frequency on the target motherboard without manual tuning.
Sustained Load Behaviour
The dual-rank 2Rx8 organisation and absence of a heat spreader mean thermal headroom depends on case airflow during prolonged workloads. Under continuous read/write cycles the kit maintains its rated timings at 1.1 V, provided the chassis delivers adequate cooling to the bare modules.
Priekšrocības
- 64 GB total capacity across two 32 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive timing
- 1 V operating voltage for efficient power draw
- 288-pin UDIMM form factor fits Supermicro BH4SR2-25G
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Jautājumi par šo preci
What does 5600 MT/s DDR5 mean for real-world throughput on the Supermicro BH4SR2-25G?
The kit runs at 5600 MT/s, delivering up to 44800 MB/s peak bandwidth per module; actual throughput depends on the motherboard's memory controller and the number of populated slots.
How does the 288-pin DDR5 UDIMM interface limit speed or capacity on this board?
The 288-pin DDR5 UDIMM form factor is keyed only for DDR5 slots and supports the kit's 5600 MT/s rating; the board's chipset and BIOS determine the maximum usable frequency and total capacity.
Will the 32 GB 2Rx8 modules fit the Supermicro BH4SR2-25G without clearance issues?
Each module is a standard-height 288-pin UDIMM with no heat spreader, so it fits the board's DDR5 slots as long as the CPU cooler or chassis does not overhang the memory sockets.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
