BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278589BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM CL40 1Rx8 1.1V 288-Pin SuperMicro X13SET-G/GC memory upgrade
A 64 GB DDR5 registered ECC memory kit of four 16 GB modules running at 4800 MT/s with CL40 latency for SuperMicro X13SET-G and X13SET-GC motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered RDIMM for server data integrity
- CL40 latency at 1.1 V operating voltage
- Validated for SuperMicro X13SET-G and X13SET-GC motherboards
SuperMicro X13SET-G/GC Memory Kit
This 64GB kit contains four 16GB DDR5 4800 ECC registered DIMMs validated for SuperMicro X13SET-G and X13SET-GC motherboards. It targets administrators and integrators who need reliable, high-capacity memory for server and workstation workloads. The registered design with on-die ECC helps maintain data integrity under sustained load.
Registered DDR5 Modules with Standard Pinout
Each module uses a 288-pin RDIMM form factor and operates at 1.1V with CL40 latency. The 1Rx8 organisation and major OEM DRAM chips from Samsung, Micron or Hynix provide consistent electrical characteristics. No heat spreaders are fitted, so airflow across the PCB is unimpeded in dense chassis layouts.
Low-Voltage DDR5 Operation
Running at 1.1V reduces power draw per module compared with earlier DDR generations while delivering 4800 MT/s throughput. The absence of heat spreaders means thermal performance depends on case airflow, but registered buffering and ECC logic add minimal overhead. Under typical server loads the kit runs cool and quiet without active cooling on the memory itself.
Priekšrocības
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed with PC5-38400 bandwidth rating
- ECC registered RDIMM for server data integrity
- CL40 latency at 1.1 V operating voltage
- Validated for SuperMicro X13SET-G and X13SET-GC motherboards
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Jautājumi par šo preci
What DDR5 speed and data-rate does this 4800 kit deliver?
The modules run at DDR5 4800 (PC5-38400) with CL40 latency and 1.1 V operation.
Will these 288-pin RDIMMs fit the SuperMicro X13SET-G and X13SET-GC boards?
Yes, the kit is validated for the X13SET-G and X13SET-GC motherboards using the standard 288-pin DDR5 RDIMM slot.
How do I install the four 16 GB sticks and what step is often missed?
Power off the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify all four are recognised in BIOS.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
