BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00275897BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB 4x16GB DDR5 5600 CL46 1.1V 288-pin UDIMM Supermicro C9Z890-MW memory upgrade
Four 16 GB DDR5 modules totalling 64 GB at 5600 MHz CL46 1.10 V for Supermicro C9Z890-MW motherboards
- Capacity64GB (4 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64GB total capacity across four 16GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive system operation
- 1V low-voltage design reduces power draw
- 288-pin UDIMM form factor fits Supermicro C9Z890-MW
Supermicro C9Z890-MW compatible DDR5 kit
This 64GB kit contains four 16GB DDR5 5600 modules built for the Supermicro C9Z890-MW motherboard. Each stick is a 288-pin UDIMM running at 1.1V with CL46 timing. The memory is non-ECC and unbuffered for standard desktop operation.
Capacity headroom for multi-threaded workloads
Four ranks of 1Rx8 chips give 64GB total, enough for virtual machines, large datasets and content creation pipelines. The PC5-44800 rating feeds the CPU at 5600 MT/s. Workloads that exceed 64GB will need a platform with more slots or higher-density modules.
Low-voltage operation keeps thermals simple
At 1.10V the kit runs at standard DDR5 voltage without a heat spreader. Unbuffered modules add minimal load to the memory controller. Power draw stays within normal desktop limits and fan noise is unaffected by the memory itself.
Priekšrocības
- 64GB total capacity across four 16GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- CL46 CAS latency for responsive system operation
- 1V low-voltage design reduces power draw
- 288-pin UDIMM form factor fits Supermicro C9Z890-MW
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
Jautājumi par šo preci
Will the 5600 MT/s DDR5 kit run reliably with the Supermicro C9Z890-MW motherboard's native memory controller?
The kit is validated for the Supermicro C9Z890-MW and operates at DDR5 5600 with CL46 timings at 1.10 V, matching the board's supported specification.
How can I confirm the 4x16 GB modules are recognised at 5600 MT/s after installation?
Enter the BIOS or use a system-information utility; all four DIMMs should show as 16 GB each, running at 5600 MT/s with CL46 latency.
Does the package include only the four UDIMMs or are any extra accessories supplied?
The box contains the 64 GB kit — four 16 GB 288-pin DDR5 UDIMMs — and nothing else; no heat spreaders or cables are included.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
