Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-932N-X06PF

A 64GB kit of four 16GB DDR5 ECC registered RDIMMs running at 6400MHz with CL52 latency and 1.1V for the Supermicro H13SSL-N motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity across four 16 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for H13SSL-N
  • Registered ECC RDIMM design offloads controller and corrects single-bit errors
  • 10 V operation matches platform voltage requirement for stable population
  • 288-pin form factor fits exactly the Supermicro H13SSL-N memory slots

Exact-match DDR5-6400 kit for Supermicro H13SSL-N

This 64GB kit (4 x 16GB) is built to the precise DDR5-6400 (PC5-51200) specification that the Supermicro H13SSL-N memory controller expects. Registered ECC RDIMM modules with 1Rx8 organization and 1.10V operation ensure the board recognises full capacity and runs at rated speed without manual tuning. It is not suited for systems that require unbuffered UDIMMs or SODIMM form factors.

Capacity and headroom for multi-threaded workloads

Four 16GB ranks deliver 64GB total, letting the platform keep large in-memory databases, virtual-machine fleets or compile farms resident without swapping. CL52 latency and 1Rx8 density keep bandwidth steady while all slots are populated, though workloads that exceed 64GB will still require a higher-capacity configuration.

Thermals, noise and power in normal use

Bare modules without heat spreaders rely on server chassis airflow; at 1.10V the DRAM draws minimal power and runs cool under sustained load. No onboard fans mean zero acoustic contribution, and the registered buffer reduces electrical loading on the memory controller for stable long-term operation.

Priekšrocības

  • 64 GB capacity across four 16 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for H13SSL-N
  • Registered ECC RDIMM design offloads controller and corrects single-bit errors
  • 10 V operation matches platform voltage requirement for stable population
  • 288-pin form factor fits exactly the Supermicro H13SSL-N memory slots

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Jautājumi par šo preci

Will this 64GB 4x16GB DDR5 6400 CL52 1.1V ECC RDIMM kit run alongside my existing DDR5 ECC RDIMMs on the Supermicro H13SSL-N?

Mixing modules of different speeds, latencies or ranks can prevent the server from booting or force all channels to run at the slowest common settings. For reliable operation, populate all slots with identical kits.

How can I verify the kit is running at DDR5 6400 CL52 with ECC active after installation?

Enter the BIOS and confirm the memory frequency reads 6400 MT/s, CAS latency shows 52, voltage is 1.10V and ECC status is enabled. The OS should report 64 GB total and show corrected error counters at zero.

What does the package contain and is anything else required to install it?

The box includes four 16 GB 288-pin DDR5 ECC Registered DIMMs. No extra parts are needed; install them into the motherboard's DDR5 RDIMM slots following the population order in the H13SSL-N manual.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.