SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00495895BTC
Krājumā
NEMIX RAM
NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM 288-PIN B13SEE-CPU-25G memory upgrade
A 64 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V operation for Supermicro servers
- Capacity64GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64GB single-module capacity for dense server memory configurations
- DDR5 5600 speed with CL46 latency for high-throughput workloads
- ECC registered design detects and corrects data errors in mission-critical systems
- 1V operating voltage reduces power draw in 24/7 server environments
- Validated for Supermicro B13SEE-CPU-25G motherboard compatibility
64GB DDR5 ECC RDIMM for SuperMicro B13SEE-CPU-25G
This 64GB DDR5 5600MHz registered DIMM is built for SuperMicro B13SEE-CPU-25G motherboards. It targets server and workstation administrators who require error-correcting memory for stable, continuous operation in enterprise environments.
Capacity and headroom at CL46 1.1V
A single 64GB 2Rx4 module delivers high density per slot, letting you reach large system totals on boards with limited DIMM count. The CL46 latency and 1.1V operation suit standard DDR5 5600 workloads; bandwidth-sensitive tasks that demand lower latency or higher frequencies will hit the module's specified limits.
Registered ECC fit for 288-pin DDR5 slots
The module plugs directly into 288-pin DDR5 RDIMM slots and uses the registered buffer to reduce electrical load on the memory controller. It requires a platform that supports DDR5 ECC registered memory; consumer desktop boards and non-ECC channels cannot use it. No heat spreader is fitted, so airflow in the chassis must be adequate for sustained loads.
Priekšrocības
- 64GB single-module capacity for dense server memory configurations
- DDR5 5600 speed with CL46 latency for high-throughput workloads
- ECC registered design detects and corrects data errors in mission-critical systems
- 1V operating voltage reduces power draw in 24/7 server environments
- Validated for Supermicro B13SEE-CPU-25G motherboard compatibility
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K1 |
| Capacity | 64GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
Jautājumi par šo preci
Will this 5600 MHz DDR5 RDIMM downclock to 4800 MHz if I keep older DDR5 modules in the same SuperMicro B13SEE-CPU-25G system?
The module is rated for 5600 MHz PC5-44800 and will run at the highest common speed supported by the memory controller and any installed modules.
How can I confirm the ECC registered RDIMM is operating correctly after installation?
Check the BIOS or system management interface for the 64 GB capacity, 2Rx4 organisation, CL46 latency, 1.10 V voltage and ECC status showing enabled.
Does the single 64 GB stick ship with a heat spreader or any extra cables I need to buy separately?
The package contains only the 288-pin DDR5 RDIMM; no heat spreader is included and no additional cables are required for installation.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
