Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 64GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-1Z5Q-AK22J

64 GB DDR5 6400 CL52 2Rx4 1.1 V ECC registered RDIMM built for the Supermicro H13DSH

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 64 GB DDR5-6400 capacity lets the Supermicro H13DSH run fully populated at rated speed
  • CL52 timing and 1.1 V voltage match the board's memory-controller expectations for stable operation
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors to prevent silent data corruption
  • 288-pin RDIMM form factor fits the H13DSH DIMM slots exactly, not UDIMM or SODIMM
  • Lifetime replacement warranty with US-based technical support backs the upgrade for the server's service life

Exact-match DDR5 upgrade for Supermicro H13DSH

This 64 GB DDR5 6400 module delivers the precise 2Rx4 registered ECC configuration the H13DSH memory controller expects. The 1.10 V operating voltage and CL52 timing match the board's validated population rules so the full capacity is recognised at rated speed. Builders expanding a compatible Supermicro server avoid the trial-and-error of generic DIMMs.

Thermals noise and power draw in normal use

Registered buffering reduces electrical load on the memory controller, allowing every slot to run fully populated without extra voltage. The 1.10 V DDR5 baseline keeps power draw low compared with higher-voltage alternatives. No heat spreader is fitted, so airflow through the chassis determines module temperature under sustained workloads.

What the bundled accessories

The package contains only the 288-pin RDIMM itself; no cables, brackets or configuration utilities are included. Installation follows the motherboard manual's approved DIMM population order. Lifetime replacement coverage and US-based technical support provide a fallback if a module fails verification after deployment.

Priekšrocības

  • 64 GB DDR5-6400 capacity lets the Supermicro H13DSH run fully populated at rated speed
  • CL52 timing and 1.1 V voltage match the board's memory-controller expectations for stable operation
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors to prevent silent data corruption
  • 288-pin RDIMM form factor fits the H13DSH DIMM slots exactly, not UDIMM or SODIMM
  • Lifetime replacement warranty with US-based technical support backs the upgrade for the server's service life

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Jautājumi par šo preci

How do I install this 288-pin RDIMM into the Supermicro H13DSH, and which population rule is most often missed?

Insert the module into the correct DDR5 slot following the motherboard manual's population sequence for 2Rx4 registered DIMMs; the step most often missed is matching the exact slot order required for full 64GB recognition at 6400 speed.

What maintenance or replacement will this 1.1V ECC RDIMM need during its service life?

No scheduled maintenance is required; the module is designed for continuous server operation with on-die ECC correcting single-bit errors, and replacement only occurs if a hardware fault is detected.

What limit appears first when this CL52 6400 DDR5 runs fully populated under sustained load?

The CAS latency of 52 cycles at 6400 MT/s sets the timing boundary; sustained throughput is constrained by this latency figure before thermal or voltage limits are reached.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.