Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR3 SODIMM modules with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333MHz PC3-10600 1.35V 204-Pin SODIMM Kit for POSIFLEX HC-1521IR memory upgrade

SKU CH-RRTY-KCT6B

A 204-pin DDR3 SODIMM kit adds 8 GB of CL9 unbuffered memory at 1333 MHz to the POSIFLEX HC-1521IR terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB dual-channel kit doubles POS terminal memory
  • DDR3 1333 PC3-10600 matches factory speed grade
  • 35 V low-voltage modules cut power draw
  • 204-pin SODIMM form factor fits HC-1521IR slot
  • Major OEM Samsung Micron Hynix chips ensure stable operation

POSIFLEX HC-1521IR memory kit

This 8 GB kit supplies two 4 GB DDR3 SODIMM modules built for the POSIFLEX HC-1521IR touch-screen terminal. It uses PC3-10600 memory running at 1333 MHz with CL9 latency and 1.35 V operation. The unbuffered non-ECC design matches the system's original specification for straightforward installation.

Sustained workload stability

Modules are stress-tested under load to verify reliable operation during continuous point-of-sale transactions. The 2Rx8 organisation and major OEM chipsets from Samsung Micron or Hynix maintain data integrity over long shifts. Unbuffered signalling keeps latency low for responsive terminal performance.

Thermals noise and power

Low-voltage 1.35 V operation reduces power draw compared with standard 1.50 V DDR3 SODIMMs. No heat spreader is fitted so the modules rely on the terminal's existing airflow. Silent passive cooling suits the quiet retail or hospitality environments where the HC-1521IR is deployed.

Priekšrocības

  • 8 GB dual-channel kit doubles POS terminal memory
  • DDR3 1333 PC3-10600 matches factory speed grade
  • 35 V low-voltage modules cut power draw
  • 204-pin SODIMM form factor fits HC-1521IR slot
  • Major OEM Samsung Micron Hynix chips ensure stable operation

Specifikācijas

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Jautājumi par šo preci

How much heat and power does the 1.35 V kit draw when the POSIFLEX HC-1521IR runs continuously?

The modules operate at 1.35 V with no heat spreader, so they run cool and draw minimal power during all-day operation in the terminal.

What must the POSIFLEX HC-1521IR already have for this 204-pin DDR3 SODIMM kit to install and work?

The terminal needs two free 204-pin DDR3 SODIMM slots that accept 1.35 V non-ECC unbuffered modules at 1333 MHz.

Will the 1333 MHz CL9 kit work if the terminal currently has slower DDR3 modules installed?

Yes, the system will run all modules at the speed of the slowest stick, so existing slower DDR3 memory remains compatible.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.