BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277988BTC
Krājumā
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3 1600MHz CL11 1.35V 204-Pin SODIMM Kit for Apple iMac Late 2012–Mid 2015
8 GB kit of two DDR3 1600 MHz SODIMMs at 1.35 V for iMac models from 2012 to 2015
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.35V
- Ready for iMac Late 2012 through Mid 2015
- 8 GB kit (2 × 4 GB) adds responsive multitasking
- DDR3 1600 MHz CL11 matches factory timing
- Low 1.35 V operation runs cool and stable
- 204-pin SODIMM form factor fits the memory slot
Apple iMac DDR3 SODIMM kit
This NEMIX RAM kit supplies 8 GB of DDR3 1600 memory in two 4 GB modules built to the 204-pin SODIMM form factor. The sticks run at 1.35 V with CL11 latency and use unbuffered non-ECC chips sourced from major OEM suppliers. They are validated for Apple iMac models released between late 2012 and mid 2015.
Owners of compatible iMacs wanting
The dual-rank 2Rx8 organisation matches the factory specification for these all-in-one desktops. Users who need ECC error correction, registered modules, higher capacities per slot, or memory for Windows laptops, newer Macs or PC motherboards should look at other products.
Ready-to-install matched pair
The kit delivers two modules tested together so they operate in dual-channel mode without further configuration. No heat spreaders are included, keeping the low-profile height required by the iMac's internal slot spacing. No software or drivers are bundled.
Priekšrocības
- Ready for iMac Late 2012 through Mid 2015
- 8 GB kit (2 × 4 GB) adds responsive multitasking
- DDR3 1600 MHz CL11 matches factory timing
- Low 1.35 V operation runs cool and stable
- 204-pin SODIMM form factor fits the memory slot
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | Apple iMac/Mac Mini Compatible Series Memory |
| Model | Apple DDR3 1600MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS12800-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.35V |
| Compatible System | Apple |
| CAS Latency | CL11 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Jautājumi par šo preci
Which iMac models accept this 204‑pin DDR3 SODIMM kit?
The kit is validated for Apple iMac models released from late 2012 through mid 2015.
Can I mix these 1.35 V modules with the original 1.5 V memory already in my iMac?
Yes — the memory controller will run both kits at the lower 1.35 V, so the original sticks stay compatible.
How do I confirm the CL11 1600 MHz modules are recognised at full speed after install?
Open About This Mac → System Report → Memory and verify each slot shows 4 GB DDR3 at 1600 MHz.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
