Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips, gold edge connector, thin rectangular SODIMM shape

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 ECC SODIMM 260-Pin 1.2V

SKU CH-T6WY-VWVS5

8 GB DDR4 2400 ECC SODIMM with CL17 latency and 1.20 V operation for laptops and NAS devices

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 8GB

  • ECC protection prevents data corruption in critical workloads
  • 2400 MHz speed delivers responsive multitasking performance
  • 20 V operation reduces power consumption and heat
  • 260-pin SODIMM fits laptops, AIOs, SFF and NAS devices
  • CL17 latency ensures quick memory access times

NEMIX RAM 8GB DDR4 ECC SODIMM

This 260-pin DDR4 ECC SODIMM provides 8GB of unbuffered memory at 2400MHz with CL17 latency. It operates at 1.20V and uses a 2Rx8 organization. The module lacks a heat spreader and targets laptops, all-in-one PCs, small form factor systems and NAS devices that require error-correcting code memory for data integrity.

Who this suits and who should look elsewhere

This module suits IT professionals and system builders upgrading or repairing compatible laptops, AIOs, SFF PCs or NAS appliances that specifically require DDR4 ECC unbuffered SODIMMs. It is not for buyers whose platforms only accept non-ECC memory, who need higher capacities than 8GB per slot, who require registered or load-reduced DIMMs, or who need faster speeds than 2400MHz for their workload.

The deciding specification

The single specification that determines compatibility is the ECC unbuffered DDR4 SODIMM format at 2400MHz; the system must explicitly support ECC unbuffered SO-DIMMs, otherwise the module will not function correctly.

Priekšrocības

  • ECC protection prevents data corruption in critical workloads
  • 2400 MHz speed delivers responsive multitasking performance
  • 20 V operation reduces power consumption and heat
  • 260-pin SODIMM fits laptops, AIOs, SFF and NAS devices
  • CL17 latency ensures quick memory access times

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory
ModelDDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory
Part NumberMSE19200-828K1
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesDDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does my laptop need a 260-pin DDR4 SO-DIMM slot to use this module?

Yes, this module uses a 260-pin DDR4 SO-DIMM form factor and requires a matching slot.

Will this ECC unbuffered stick work if my system currently has non-ECC memory installed?

Most platforms require all modules to be ECC unbuffered; mixing with non-ECC typically prevents ECC from functioning.

How can I verify the module is running at DDR4 2400 with CL17 after installation?

Check the memory speed and latency in your BIOS or a system-information tool; they should show 2400 MT/s and CL17.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.