SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501458BTC
Krājumā
NEMIX RAM
NEMIX RAM 8GB DDR4 2933MHz CL21 1Rx8 ECC SODIMM memory upgrade
8GB DDR4 2933MHz ECC SODIMM with CL21 latency and 1.2V operation for Supermicro X12SCV motherboards
- Capacity8GB
- Type260-Pin DDR4 ECC SODIMM
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCYes
- ECC corrects single-bit errors on the fly
- 2933 MHz speed matches system memory controller
- 20 V low voltage reduces power draw
- 260-pin SODIMM fits Supermicro X12SCV boards
- 1Rx8 unbuffered rank enables full capacity recognition
Exact-match DDR4 ECC SODIMM upgrade
This 8GB DDR4 2933MHz CL21 1Rx8 unbuffered ECC SODIMM is built for Supermicro X12SCV-W and X12SCV-LVDS motherboards. It runs at 1.2V with a 260-pin form factor that matches the board's memory controller requirements. The module uses major OEM chips and delivers error-correcting reliability for workstation or server tasks.
Replaces non-ECC or slower DDR4 SODIMMs
If your system currently uses non-ECC memory or lower-speed DDR4 modules, this kit adds single-bit error correction and the exact 2933MHz rating the platform expects. The jump is worth it when data integrity matters for databases, virtualization or long-running compute jobs. It will not fit full-size UDIMM or RDIMM slots.
Check your manual for population rules
Verify the maximum supported capacity per slot and the approved installation order for your specific Supermicro model before ordering. Ensure the board requires unbuffered 260-pin ECC SODIMMs rather than registered or load-reduced variants. Confirm the system accepts 1Rx8 rank configuration at 1.2V.
Priekšrocības
- ECC corrects single-bit errors on the fly
- 2933 MHz speed matches system memory controller
- 20 V low voltage reduces power draw
- 260-pin SODIMM fits Supermicro X12SCV boards
- 1Rx8 unbuffered rank enables full capacity recognition
Specifikācijas
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 ECC Unbuffered SODIMM Memory |
| Part Number | MSE23400-818K1 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 260-PIN ECC SODIMM KIT |
Jautājumi par šo preci
Will the 260-pin SODIMM fit my Supermicro X12SCV-W motherboard?
Yes, the 260-pin DDR4 ECC SODIMM form factor matches the slot on the Supermicro X12SCV-W and X12SCV-LVDS boards.
What is the correct slot order when installing this 1Rx8 module?
Install the module in the primary slot first, following the population sequence in your system manual for 1Rx8 unbuffered ECC memory.
Does the ECC function require any future firmware updates or battery replacement?
No, the on-die ECC operates automatically without firmware updates or a backup battery.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
