Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-VQEZ-XQ5HR

96GB DDR5 5600 ECC RDIMM kit (2×48GB) validated for Supermicro H13SSL-N servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Skatīt vēl 24 konfigurācijas
  • 96 GB total capacity from two 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation at 1.10 V specified voltage reduces power draw per module
  • 288-pin RDIMM form factor matches the board's required slot type exactly

Exact-match DDR5 upgrade for Supermicro H13SSL-N

This 96GB kit delivers two 48GB DDR5 5600 registered ECC modules built to the board's precise rank, voltage and timing requirements. The 2Rx8 organisation and 1.1V operation let the memory controller recognise full capacity and run at rated speed without manual tuning.

Suited for servers needing maximum registered ECC

Administrators populating every slot on an H13SSL-N gain the stability of buffered architecture and on-the-fly single-bit error correction. Builders using consumer UDIMMs, non-ECC modules or a different DDR generation will find the modules physically or electrically incompatible.

Sustained load behaviour with registered ECC

Registered buffering reduces electrical load on the controller so all slots remain stable at 5600 MT/s during continuous throughput workloads. ECC correction prevents silent data corruption from accumulating over long runtimes, avoiding the unplanned reboots that unbuffered memory can allow.

Priekšrocības

  • 96 GB total capacity from two 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation at 1.10 V specified voltage reduces power draw per module
  • 288-pin RDIMM form factor matches the board's required slot type exactly

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does this 288-pin DDR5 RDIMM kit require a Supermicro H13SSL-N motherboard to operate?

Yes, the 96GB kit is validated for the Supermicro H13SSL-N motherboard and will only function in systems that accept 288-pin registered DDR5 ECC modules at 1.1V.

Can I mix these 2Rx8 CL46 modules with existing DDR5 RDIMMs of a different rank or speed on the same board?

Mixing different ranks or speeds is not recommended; the memory controller will downclock all slots to the slowest module and may limit total capacity or stability.

How do I confirm the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify the reported speed shows 5600 MT/s, CAS latency 46, and ECC status enabled for each 48GB DIMM.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.